OED Agricultural Wear Parts Beet Harvester Shares HV30 1500
Tungsten Carbide Beet Harvester Shares Agriculture Wear Parts
OED offers products that weld cast products together with the corresponding carbide wear-resistant components to improve the product life. Our company can be based on different agricultural machinery and wear-resistant parts shape, to provide customized carbide wear-resistant parts, can effectively improve product efficiency and reduce maintenance costs.
Under the condition of sliding wear, our company provides brazing methods to combine carbide and steel body, can effectively protect the use of steel parts, improve wear performance. Common products are:
Seed drills, subsoil machines, tillers, plows, silt sprinklers, lawn mowers, root harvesters, sugar cane harvesters, buckets, spiral drills and scrapers.
Why choose us for agriculture wear parts:
- Constantly qualified tungsten carbide wear parts. 100% brand new material.
- More than 15 years experience in producing wear parts of agriculture.
- Quality guarantee, no quality complaint over 15 years.
- Cost effective and customized service is available.
Our products range of agriculture wear parts:
- Power harrow tines
- Subsoiler points and wings
- Plough points and wings
- Cultivator points
- Bed tiller tines
- Beet harvester turbine tines
- Beet harvester shares
- Sugar cane harvester base cutters
- All scrapers
- Behind regular tungsten
- The sides of subsoiler legs
- The sides of cultivator legs
- The front of subsoiler shins
- Straw rake tines
- Many types of drill coulters
- Manure spreader beaters
Recommended carbide grades of agriculture wear parts:
| Application Code |
Chemical Composition | Physical Properties of powder |
Physical and mechanical properties and mirco structure as stintered |
Application recommended | ||||||||
| Co | Tic/ TacNbc |
WC | Hall Flow | Apparent density |
Density | Hardness | Transverse rupture strength |
Coercivity | Magnetic saturation |
Porosity | ||
| s/25cm3 | g/cm3 | g/cm3 | HV 30 | N/mm2 | KA/m | % | ||||||
| G05 | 6 | 94 | 35 | 3.45 | 14.9 | 1370-1490 | ≥2300 | 11.3-12.6 | 5.5-5.9 | A02 B00 | For drilling soft or medium hard rock formation with a single-zxis compression strength less than 60 Mpa | |
| 7.5 | 92.5 | 35 | 3.45 | 14.78 | 1300-1500 | ≥2600 | 9.4-12.5 | 6.6-7.5 | A02 B00 | |||
| G10 | 8.3 | 91.7 | 36 | 3.4 | 14.65 | ≥1500 | ≥2000 | 7.6-9.6 | 7.1-8.2 | A02 B02 | For drilling soft or medium hard rock formation with a single-zxis compression strength of60-120 Mpa | |
| 9.5 | 90.5 | 36 | 3.55 | 14.52 | 1155-1275 | ≥2400 | 6.6-7.4 | 8.6-9.5 | A02 B02 | |||
| G20 | 10 | 0.5 | 89.5 | 35 | 3.39 | 14.51 | ≥1100 | ≥2550 | 6.0-8.0 | 8.8-9.8 | A02 B02 | For drilling soft or medium hard rock formation with a single-zxis compression strength of 120-200 Mpa |
| 11.5 | 88.5 | 36 | 3.4 | 14.3 | ≥1050 | ≥2400 | 6.0-8.0 | 9.5-11.4 | A02 B00 | |||
| G30 | 13 | 87 | 35 | 3.35 | 14.22 | ≥980 | ≥2500 | 5.5-7.0 | 11.7-13.0 | A02 B02 | For drilling soft or medium hard rock formation with a single-zxis compression strength of 120-200 Mpa | |
| 11 | 89 | 36 | 3.45 | 14.39 | 1060-1170 | ≥2110 | 5.3-6.1 | 9.9-11.0 | A02 B02 | |||
| G40 | 15 | 85 | 37 | 3.15 | 14 | 950-1100 | ≥2160 | 4.8-6.3 | 13.5-15.0 | A02 B02 | For drilling soft or medium hard rock formation with a single-zxis compression strength of 120-200 Mpa | |
| 16.5 | 83.5 | 37 | 3.13 | 13.9 | ≥880 | ≥2640 | 4.8-6.4 | 14.1-16.4 | A02 B02 | |||
| G50 | 20 | 80 | 37 | 3.13 | 13.5 | ≥760 | ≥2480 | 3.5-4.5 | 17.0-19.8 | A02 B02 | For drilling hard or super hard rock formation with a single axis compression strength higher than 200 Mpa | |
| G60 | 25 | 75 | 39 | 3.15 | 13.12 | 830-870 | ≥2650 | 4.0-4.6 | 20.0-25 | A04 B02 | ||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.