Diamerter 500mm Distillation Tower Internals Random Packing Support Plate Ss304

Characteristics of beam - type scattered pile support plate

Good rigidity and large capacity.

The gas pressure drop through the support plate is small.

The gas-liquid channel is separated, the gas phase is sprayed to the packing layer through the side opening, and the liquid phase flows to the lower packing layer through the opening at the bottom of the support plate, and the gas-liquid distribution is uniform

Large free cross-sectional area of gas flow. In general, the free cross-sectional area can reach more than 90% of the tower cross-sectional area, thus allowing higher gas-liquid loads.

Random packing support plate for distillation column

It consists of several beam support plates and is a removable structure.

The opening size of the support plate is generally 12mm*45mm long round hole. When the size (diameter or height) of the bulk package is smaller than the opening size of the support plate, lay one or two layers of wire mesh on the upper surface of the support plate and stack the package.

The random packing support plate arrangements according to tower inner diameter (part table):

Pictures:

FAQ

Q1:What's the MOQ?

A1 : The MOQ is 1 set.

Q2 : What are the terms of payment?

A2 : T/T , L/C at sight, Paypal , etc.

Q3 : What's the delivery time?

A3 : About 10-15days .after received the fund.

Q4 : Can you provide samples?

A4 : Yes.