IFM Pressure Sensor With Display PN2571 PN-250-SEG14-MFRKG/US/ /V

Price Negotiable

Price: USD$370

MOQ: 1

Delivery Time: 4-6weeks

Brand: IFM

Product Description

Product characteristics

Number of inputs and outputs

Number of digital outputs: 2; Number of analog outputs: 1

Measuring range

0...250 bar

0...3625 psi

0...25 MPa

Process connection

threaded connection G 1/4 external thread (DIN EN ISO 1179-2); Internal thread:M5

Application

System

gold-plated contacts

Measuring element

metallic thin film cell

Application

for industrial applications

Media

liquids and gases

Medium temperature [°C]

-25...80

Min. bursting pressure

1200 bar

17400 psi

120 MPa

Pressure rating

500 bar

7250 psi

50 MPa

Vacuum resistance [mbar]

-1000

Type of pressure

relative pressure

Electrical data

Operating voltage [V]	18...30 DC; (to SELV/PELV)
Current consumption [mA]	< 35
Min. insulation resistance [MΩ]	100; (500 V DC)
Protection class	III
Reverse polarity protection	yes
Power-on delay time [s]	0.3
Integrated watchdog	yes

Inputs / outputs

Number of inputs and outputs	Number of digital outputs: 2; Number of analog outputs: 1

Outputs

Total number of outputs	2
Output signal	switching signal; analog signal; IO-Link; (configurable)
Electrical design	PNP/NPN
Number of digital outputs	2
Output function	normally open / closed; (configurable)
Max. voltage drop switching output DC [V]	2
Permanent current rating of switching output DC [mA]	250
Switching frequency DC [Hz]	< 500
Number of analog outputs	1
Analog current output [mA]	4...20; (scalable 1:5)
Max. load [Ω]	500
Analog voltage output [V]	0...10; (scalable 1:5)
Min. load resistance [Ω]	2000
Short-circuit protection	yes
Type of short-circuit protection	yes (non-latching)
Overload protection	yes

Measuring/setting range

Measuring range

0...250 bar

0...3625 psi

0...25 MPa

Analog start point

0...200 bar

0...2900 psi

0...20 MPa

Analog end point

50...250 bar

725...3625 psi

5...25 MPa

Factory setting / CMPT = 2

Set point SP

1.5...250 bar

25...3625 psi

0.15...25 MPa

Reset point rP

0.5...249 bar

10...3610 psi

0.05...24.9 MPa

Min. difference between SP and rP

1.5 bar

15 psi

0.15 MPa

In steps of

0.5 bar

5 psi

0.05 MPa

Status_B High Resolution / CMPT = 3

Set point SP

1.6...250 bar

23...3626 psi

0.16...25 MPa

Reset point rP

0.5...249 bar

8...3611 psi

0.05...24.9 MPa

Min. difference between SP and rP

1.1 bar

15 psi

0.11 MPa

In steps of

0.1 bar

1 psi

0.01 MPa

Accuracy / deviations

Switch point accuracy [% of the span]	< ± 0,4; (Turn down 1:1)
Repeatability [% of the span]	< ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1)
Characteristics deviation [% of the span]	< ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting)
Hysteresis deviation [% of the span]	< ± 0,1; (Turn down 1:1)
Long-term stability [% of the span]	< ± 0,05; (Turn down 1:1; per 6 months)
Temperature coefficient zero point [% of the span / 10 K]	0,2; (-25...80 °C)
Temperature coefficient span [% of the span / 10 K]	0,2; (-25...80 °C)
Notes on the accuracy / deviation	switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%

Reaction times

Response time [ms]	< 1.5
Delay time programmable dS, dr [s]	0...50
Damping process value dAP [s]	0...4
Damping for the analog output dAA [s]	0...4
Max. response time analog output [ms]	3

Software / programming

Parameter setting options	hysteresis / window; normally open / closed; switch-on/switch-off delay; Damping; Display unit; current/voltage output

Interfaces

Communication interface

IO-Link

Transmission type

COM2 (38,4 kBaud)

IO-Link revision

1.1

SDCI standard

IEC 61131-9

SIO mode

yes

Required master port class

A; (when pin 2 not connected: B)

Supported DeviceIDs

Type of operation	DeviceID
Factory setting / CMPT = 2	460
Status_B High Resolution / CMPT = 3	639

Note

For further information please see the IODD PDF file at "Downloads"

Factory setting / CMPT = 2

Profiles

Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis

Min. process cycle time [ms]

2.3

IO-Link resolution pressure [bar]

0.1

IO-Link process data (cyclical)

Function	bit length
pressure	14
binary switching information	2

IO-Link functions (acyclical)

application specific tag

Status_B High Resolution / CMPT = 3

Profiles

Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000)

Min. process cycle time [ms]

IO-Link resolution pressure [bar]

0.1

IO-Link process data (cyclical)

Function	bit length
pressure	16
device status	4
binary switching information	2

IO-Link functions (acyclical)

application specific tag

Operating conditions

Ambient temperature [°C]	-25...80
Storage temperature [°C]	-40...100
Protection	IP 65; IP 67

Tests / approvals

EMC

DIN EN 61000-6-2
DIN EN 61000-6-3

Shock resistance

DIN EN 60068-2-27

50 g (11 ms)

Vibration resistance

DIN EN 60068-2-6

20 g (10...2000 Hz)

MTTF [years]

129

UL approval

UL approval number

J014

Pressure equipment directive

sound engineering practice; can be used for group 2 fluids; group 1 fluids on request

Mechanical data

Weight [g]	261.5
Material	stainless steel (630/1.4542/17-4 PH); stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC
Materials (wetted parts)	stainless steel (630/1.4542/17-4 PH)
Min. pressure cycles	100 million
Tightening torque [Nm]	25...35; (recommended tightening torque; Depends on lubrication, seal and pressure rating)
Process connection	threaded connection G 1/4 external thread (DIN EN ISO 1179-2); Internal thread:M5
Process connection sealing	FKM (DIN EN ISO 1179-2)
Restrictor element integrated	no (can be retrofitted)