5.5KW Central Dust Collection System For Auto Body 75mm Caliber CE Certified

Car Repair Tool Central Dust Collection System For Auto Body Painting Refinishing Host

Advantage:

variable frequency constant voltage control
when using multiple stations,the vacuum suction is kept constant,and the energy consumption can be reduced to the lowest level as much as possible,so as to save a lot of energy costs.

terminal host linkage control
The terminal controller has automatic mode and manual mode,which can be switched at any time.

Automatic ASH Cleaning
The machine adopts high-pressure gas blowing filter element,so that the dust adsorbed on the filter element surface can be separated from the filter element surface under the back blowing of high-pressure gas.

friendly human-computer interface
All function settings can be completed on the touch screen. This machine has perfect feedback information prompt.

Features:

• Fully automatic & controlled by touch screen.
• The machine automatically extracts the dust when sanding. 5.5KW/7.5KW/11KW available. Maximum for 20 stations.
• ABB switch; two doors are good sealed and can be open
• Strong ventilation system
• Two alarming systems. Easily master the working status.
•  

Technical Data Sheet :

Motor Power(Max.): ...........5.5KW/7.5KW/11KW (3 options)

Voltage:…………………… 380V/3PH

Machine Size(W*D*H): …1000*7500*1700mm

Packing Size(W*D*H):….. 1100*8500*1900mm

Product Advantage :

▲ 8 inches touch screen

The motor speed can be controlled by the screen. And maintenance warning will be displayed.

▲ Hanging Unit

(1 unit for 2 working stations)

1 machine can come with 2~10 units.

▲Big silencer

Two big silencers to less the noise

▲ Two warming system, one outside

LCD can give alarm, as well as outside lights.

▲Big dust tank and dust bag (60L)

It allows multiple stations to sand at same while.

▲ Big extraction hose

Big hose is being at 75mm/110mm diameter.