Galvanized Rebar Reinforcing Mesh Welding Machine HGTO Electric Motor Power

               Galvanized Iron Reinforcing Brc Steel Rebar Electric Welded Panel Wire Mesh Welding Machine

Usage:

Construction network, bridge network, high-speed network, fence network, floor pouring top network, gas plate network, prefabricated board member network, shule plate network, floor heating network, seedbed network, flower chamber network and other welding

Machine performance and characteristics:

① Motor power, tunnel steel mesh row welding machine adopts synchronous control technology, sub-control welding and welding time are controlled by digital programming system, intelligent operation, rationalization, and has the characteristics of one pressing, sub-welding.

(2) The welding power of the tunnel steel mesh row welder is electric, and the stepping motor drives the trolley to pull the mesh. Warp and weft wires are straightened and cut by straightening and cutting machine.

(3) Welding using welding transformer, expand the scope of welding wire. Easy to operate, flexible,

Auxiliary equipment:

net shearing machine (including unloading rack, trawl trolley), straightening cylinder, straightening row, supporting wire, straightening cutting machine (price is calculated separately);

Automatic construction mesh row welding machine/mesh welding machine mesh welding process:

1. Diameter wire directly coil wire feeding;

2. The diameter wire is straightened through the straightening cylinder and the straightening row, and then welded to the welding spot. The cross wire shall be straightened and cut in advance, and the wire will fall automatically. 

3. Net drawing adopts servo motor automatic cycle net drawing, fast net drawing and smooth net surface. 

4. Row welding machine has its own net cutting machine, the net cutting machine automatically cuts the net when the net reaches the set length, automatically falls the net, the net falls on the pallet car, after falling on a full car, the worker can push away, the machine does not stop working!

5. Row welding machine can be automatically produced once it is debugged, and it can be operated by one worker. 

Specification:

1. Mesh length: 1×2m, 1.2×3m, 1.5×3m;

2. Welding wire diameter: 6-8mm;

3. Air self-cooling of welding transformer;

4. The welding form a pressing, separate control welding;

6. Welding pressure is adjustable;

7. Adjustable diameter wire size;

8. Hole spacing of weft wire is automatically changed by computer input.

Machine detailes:

Picture of control cabinet:

Ready for delivery:

Factory Picture: