1700C Single Zone Laboratory Tube Furnace 5KW With Software Control System
-
High Temperature 1700C Single Zone Tube Furnace With Software Control System
Introduction
his tube furnace uses 1800 type silicon molybdenum rod as heating element, adopts double-layer shell structure and 50-stage program temperature control system, phase shift trigger, thyristor control, furnace with alumina polycrystalline fiber material, double There is an air-cooling system between the furnace shells, which can quickly raise and lower the temperature. The ends of the corundum tubes are sealed with stainless steel flanges. The flow rate is controlled by a flow meter. The furnace has a warm field balance, low surface temperature, fast temperature rise and fall, and energy saving. The advantages are the ideal products for high-temperature atmosphere sintering, atmosphere reduction, CVD experiment and vacuum annealing in universities, research institutes and industrial and mining enterprises.
Specifications
| Model | 1700-I | 1700-II | 1700-III |
| Power | 5KW | 5KW | 6kw |
| Tube size(OD)(mm) |
High purity corundum tube :60/80/100*1000mm(tube diameter optional) Two furnace plugs are placed on each side, the plug can block the heat radiation in the center of the tube, and must be placed in the correct position of the furnace before heating
|
||
|
Dimensions |
1120X490X855 | 1120X490X855 | 1120X520X945 |
| Supply voltage | 220V | ||
| Phase | single phase | ||
| Heating element | · 1800 type MoSi2 heating element | ||
|
Temperature control type
|
UAV program temperature control instrument (standard) 1, 30-stage program temperature control intelligent PID adjustment. 2. With over-temperature protection, the electric furnace heating circuit is automatically cut off when the temperature is over-temperature or broken, (when the electric furnace temperature exceeds 1720 degrees or the thermocouple is blown, the AC relay on the main circuit will be automatically disconnected, the main circuit is broken. On, the ON light on the panel is off, the OFF light is on, and the limited protection electric furnace). 3, with 485 communication interface (standard when purchasing software) 4, with power-off protection function, that is, when the power is turned on after the power is turned off, the program does not start from the starting temperature, but the furnace temperature rises from the time of power failure. 5, the meter has the function of temperature self-tuning
|
||
| Chamber material |
1. Furnace material, using high quality alumina polycrystalline fiber 2. The surface of the inner furnace is coated with imported 1800 degree high temperature alumina coating, which can increase the emissivity and make the temperature field more balanced. |
||
| Valve and flange | |||
| Control precision | +/- 1 ℃ | ||
| Trigger | · Phase-shifted trigger | ||
| Electric appliance | Zhejiang chint | ||
| Silicon controlled | · 106/16E SEMIKRON | ||
| Maximum temperature | 1700 ℃ | ||
| Rated temperature | 1650 ℃ | ||
| Heating rate | ≤20 ℃/ Min (it can be modified as required) | ||
| Recommended rate of temperature rise | ≤10 ℃/ Min | ||
| Thermocouple Type | B Type | ||
| Heating length | 300mm | ||
| Temperature curve | |||
| Peripheral surface temperature | ≤45℃ | ||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.