10years Long Life CATM Asset GPS Tracker Support Ibeacon Wifi LBS Location
10years long life catm asset gps tracker support ibeacon wifi lbs location
NT08E is Lte - M NB - IOT CATM 2G 20000mAh Long Standby Non Powered GPS Assets Tracker, the device is desgined for assets for examples trailers, trucks , and heavy machines which requires long battery life.
Features:
Specifications:
| Physical | Dimension | 154X82X30mm(L*W*H) |
| Weight | 495±5g | |
| Cellular | Communication module | Quectel BG95 M3 |
| Frequency |
Working frequency: Cat M1: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26*/B27/B28/B66/B85 • Cat NB2: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26*/B28/B66/B71/B85 • EGPRS: 850/900/1800/1900MHz protocol: Embedded TCP/IP stack Sensitivity: -107dBm@850/900MHz -106dBm@1800/1900MHz Output power: Class 4 (2W)@850/900MHz Class 1 (1W)@1800/1900MHz GPRS data: GPRS Class 10, Mobile Station Class B |
|
| GPS |
Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s |
|
| Processor | STM | |
| Motion sensor | DA260 | |
| Wifi position | Wifi 4.0 | |
| Bluetooth | Bluetooth 5.0 | |
| Power | Battery |
Disposable Lithium-ion battery and (3.6V,20000mAh) and ultra-low discharge rate:less than 1%, store one year below 25℃ |
| Power consumption | Average working current <100mA; Power save current <7uA; | |
| GSM antenna | Internal High Gain | |
| GPS antenna | Internal High Gain | |
| SIM | Microsim | |
| Indicator | 2 status LEDs, Green: GPS, Red: Celluar(Inside enclosure) | |
| Environmental Parameter | Working Temperature | -20℃ ~ +70℃ |
| Humidity | 5% ~ 95% (no fog) | |
| Ingress Protection Rating | IP67 | |
|
More features: |
• Magnets
NT08E is with built-in with super strong magnet that can firmly stick the device to the metal surface, it is easy to install and conceal, and the device is with waterproof function, which can be installed on any assets that are outdoors .
• Low Voltage Shutdown
Device will immediately enter the low-power mode and will not wake up
VCC voltage is lower than 2.7V;
VCC voltage is lower than 2.9V and the device has been continuously reset 6 times and the power is <=2%;
• Wifi failure feature
After powering on the WIFI twice in a row, the serial port did not report any information, and followed the positioning packets it will report a WIFI failure alarm;
• Collision alarm
When the acceleration change value exceeds A, the device immediately wakes up and reports a collision alarm, please note collision alarm won’t work if the device is in motion and static mode as well as warehouse mode.
Q1. Can you help for design?
A:Yes,we have our own software and hardware engineer,you can give your idea to us,we can assist the design work.Provide sample for your reference.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.