1GE 3FE CATV EPON ONU V2804RET With RF Output Wireless Router
V2804RET Epon Onu 1GE + 3FE + CATV With RF Output Wireless Router
Product Description
V2804RET with 1GE+3FE+WiFi+CATV ONU meets telecom operators FTTO (office), FTTD (Desk) ,FTTH(Home) broadband speed, SOHO broadband access, video surveillance and other requirements to design an EPON/GPON Gigabit Ethernet products.
It is based on mature and stable, cost-effective EPON/GPON technology, high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of IEEE802.3ah and ITU-TG.984.x , China Telecom EPON/GPON equipment technical requirements and other specifications.
1GE + 3FE + CATV With RF EPON ONU
Key Features
- Advantage traffic management
- Advanced Dynamic Bandwidth Allocation (DBA)
- The WAN port supports bridge or router mode.
- Plug and play, integrated auto detecting, auto configuration, and auto firmware upgrade technology.
- Full compliance to IEEE 802.3ah specification & OAM function.
- Support rich VLAN, DHCP Server and IGMP snooping multicast feature.
- Advanced L2 features QinQ VLAN & QoS support.
- Support NAT, Firewall function.
- Support Console/ Telnet/ NMS management interface for ease of operation and maintenance.
- Support 2K MAC address table.
- Fully compatibility with OLT based on Broadcom/PMC/Cortina chipset.
Application
Specifications
| Technical item | V2804RET |
| PON interface | 1 EPON connector, SC single-mode/single-fiber, downlink/uplink 1.25Gbps. |
| PON Port Type | BOSA |
| Wavelength | Tx1310nm, Rx 1490nm, CATV 1550nm. |
| Sensitivity | <-27dBm(PX20+). |
| Overload | > -3dBm(PX20+). |
| Optical interface | 1 PON interface, 1 CATV interface, SC/APC connector |
| LAN interface | 1*10/100/1000Mbps+3*10/100Mbps auto adaptive Ethernet interfaces Full/Half. RJ45 connector. |
| RF interface | 1 RF output interface. |
| LED | 9, For Status of POWER, LOS, REG, GE, FE, CATV . |
| Operating condition | Temperature: -5℃～55℃ Humidity: 10%～90%(non-condensing) |
| Storing condition | Temperature :-30℃～60℃ Humidity :10%～90%(non-condensing) |
| Power supply | DC 12V |
| Power consumption | ≤10W |
| Dimension | 185mm×122mm×33mm(L×W×H) |
| Net weight | 0.4Kg |
Interface Description
| Port Type | Function |
| PON | SC/APC type, single mode optical fiber cable with WDM |
| LAN1~LAN4 | Connect device with ethernet port by RJ-45 cat5 cable. |
| RST | Press down reset button and keep1-5seconds to make the device restart and recover from the factory default settings. |
| WiFi | WiFi turn on/off. |
| Pair | Press down WiFi pair button to begin pairing. |
| DC12V | Connect with power adapter. |
| CATV | RF connector. |
| Power On/OFF | Power, turn on / off |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.