Gpon Epon Dual Mode ONU Network Wifi 1GE 1FE Ftth Router Fiber Optic Modem
Dual Mode ONU Fiber Optic Modem Network Wifi 1GE 1FE Ftth Router Gpon Epon Onu Ont
Product Description
G/EPON 1GE+1FE+WiFi ONU meets telecom operators FTTO (office), FTTD (Desk) ,FTTH(Home) broadband speed, SOHO broadband access, video surveillance and other requirements to design an EPON/GPON Gigabit Ethernet products. It is based on mature and stable, cost-effective EPON/GPON technology, high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of IEEE802.3ah and ITU-TG.984.x , China Telecom EPON/GPON equipment technical requirements and other specifications.
Key Features
- Dual Mode( can access gpon/epon olts ).
- Plug and play, features auto-detecting, auto-configuration, and auto firmware upgrade, etc.
- Integrated OAM remote configuration and maintenance function.
- Support rich QinQ VLAN functions and IGMP Snooping multicast features.
- Functions like transceiver diagnostic monitoring, transmitter disable, etc.
- Fully compatibility with OLT based on Broadcom/PMC/Cortina chipset.
- Support NAT, Firewall function.
Specifications
| Technical item | 1GE+1FE+WIFI |
| PON interface | 1 G/EPON port(EPON PX20+ and GPON Class B+) Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
| Wavelength | Tx1310nm,Rx 1490nm |
| Optical interface | SC/UPC connector |
| LAN interface | 1 x 10/100/1000Mbps and 1 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
| WiFi interface | Compliant with IEEE802.11b/g/n Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps 2T2R,2 external antenna 5dBi Support: multiple SSID Channel:13 Modulation type: DSSS,CCK and OFDM Encoding scheme: BPSK,QPSK,16QAM and 64QAM |
| CATV interface | RF, optical power : +2~-18dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 82dBuV(-7dBm optical input) AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), ＞35(-10dBm) |
| LED | 6, For Status of POWER,LOS,PON,GE,FE,WiFi |
| Operating condition | Temperature: 0℃～+50℃ Humidity: 10%～90%(non-condensing) |
| Storing condition |
Temperature: -30℃～+60℃ Humidity: 10%～90%(non-condensing) |
| Power supply | DC 12V/1A |
| Power supply | ≤6W |
| Dimension | 185mm×120mm×34mm(L×W×H) |
| Net weight | 0.24Kg |
Indicators
| LED | Mark | Status | Description |
| Power | PWR | On | Device is powered up. |
| Off | Device is powered down. | ||
| Optical signal loss | LOS | Blink | Device does not receive optical signals. |
| Off | Device has received optical signal. | ||
| Registration | REG | On | Device is registered to the PON system. |
| Off | Device is not registered to the PON system. | ||
| Blink | Device is registering. | ||
| Interface | GE,FE | On | Port is connected properly. |
| Off | Port connection exception or not connected. | ||
| Blink | Port is sending or/and receiving data. | ||
| Wireless | WiFi | On | WiFi turned on. |
| Off | Device is power off or WiFi turned off. | ||
| Blink | WiFi data transmission. |
Application
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.