360 Degrees Manual Rotation Stage R-Axis Fine Adjustment Base PT-SD78

Product characteristics

1. Can rotate continuously 360 °;

2. The laser scale increment is 2 ° and there is a alignment line;

3. Installation platform height: 16.1mm;

4. Tightening mechanism, which can be locked in position through screws on the side;

5. Load capacity: 110 pounds (50kg) when installed in a horizontal plane, and 9 pounds (4kg) when installed in a vertical plane.

Product specifications

The rotating base has a countertop that can continuously rotate 360 °, making it very suitable for optomechanical components that require smooth and no backlash rotation. The countertop is engraved with angle scales at 2 ° intervals. A number is marked below the scale line corresponding to every 20 ° for users to set the angle direction of the countertop. Using a 2.0mm hex wrench to secure the side set screw can lock the rotation of the platform.

The rotating table includes 4 M4 screw holes and 1 M6 central screw hole, used for the installation of different optical mechanical components.

There are 4 through holes at the corners of the base, which can be installed on the optical platform or bread board using M6 column head screws. The M4 screw holes on the side are used for vertical installation of the displacement table. When installed in this direction, the maximum load capacity of the displacement table is 9lbs (4kg). When the displacement table is installed on a horizontal plane, the maximum load that the displacement table can support is 110lbs (50kg).