Single Shaft Manual Linear Stage Left And Right 125mm×125mm Platform
Left And Right Hand Single Shaft Aluminum Slide , X Axis Manual Linear Stage
Left And Right Hand Single Shaft Aluminum Slide PT-SD11-125
The ultra precision manual translation table PT-SD11-125 is made of aluminum alloy with high sensitivity and small overall dimension. It uses cross roller guide rail and is driven by micro split head. This series of products have good sensitivity. The table has various sizes and moderate thickness, and can be used in one-dimensional or multi-dimensional combination.
Product features
The cross roller guide rail is adopted, which has strong load capacity and good wear resistance, and ensures the sensitivity and other key indicators of the product.
The main material is aluminum alloy with blackening treatment on the surface, which is suitable for optical experiments and other fields requiring high manual adjustment accuracy.
Differential head driving mode, each product is divided into left and right driving, and there are products suitable for vertical use. When combined, it is very flexible and convenient.
The products have rich dimensions, good compatibility, short delivery time and high cost performance.
Product parameters:
|
Model Number |
PT-SD11-125R |
PT-SD11-125L |
||
|
Actuator Type |
Micrometer Head |
|||
|
Operating Position |
Right |
Left |
||
|
Least Count |
10μm/degree |
|||
|
Platform |
125×125mm |
|||
|
Travel Range |
±12.5mm |
|||
|
Travel Guide |
Crossed Roller Bearing |
|||
|
Load Capacity |
Parallel:20kgf(196N) |
|||
|
Moving Precision |
Straightness |
3μm |
||
|
Pitching |
50” |
|||
|
Yawing |
30” |
|||
|
Parallelism |
30μm |
|||
|
Driving Parallelism |
10μm |
|||
|
Weight |
1.0kg |
|||
|
Surface Material |
Aluminum Alloy BLACK-Anodized |
|||
|
☆Travel 50mm can be customized. |
||||
Product Dimension Map
What are the driving modes of manual slide?
1. Gear rail and gear guide. The movement of each revolution is 17-20mm. Features: suitable for the use of rapid and large feeding, not suitable for precise positioning. It is suitable for dovetail groove slide.
2. Feed screw guide. The movement per revolution is 0.25-1mm. Features: use the pitch of precision thread to carry out simple precision movement. Because it is cheaper than micro split, it is widely used in a variety of products. It is suitable for dovetail groove slide, cross roller slide and linear steel ball slide.
3. Differential head guidance. The movement per revolution is 0.5mm. Features: general precision reading unit is
0.01mm is suitable for precise transmission, precise positioning or transmission adjustment. It is suitable for dovetail groove slide, cross roller slide and linear steel ball slide.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.