SS 304 Material Bag Filter Housing For Chemical Industy Water Treatment

Working principle

The bag filter is easy to operate. When in use, just install the filter bag with the required fineness grade in the filter cartridge, check whether the O-ring is intact, and then tighten the ring bolt of the filter cartridge cover to put it into operation. After the pump is started, the pressure gauge on the filter rises slightly, and the initial pressure is about 0.05Mpa. With the extension of service time, the filter residue in the cylinder gradually increases. When the pressure reaches 0.4MPa, stop the machine, open the cylinder cover, check the residue of the filter bag, and replace the filter bag to continue to use (the filter bag can generally be reused after cleaning). The pressure of the filter is generally adjusted at 0.1-0.3mpa, which can be adjusted through the return pipeline or the return valve on the pump. Too high filtration pressure will damage the filter bag and protective screen, which needs special attention.

Specification

​​

​