OEM Soft Seated Water Gate valve Flange End DN50-DN800

OEM Soft Seated Water Gate valve Flange End DN50-DN800

1.PRODUCT PROFILE

The Non-Rising Soft Seated Gate Valve has a simple and compact structure, easy to operate, easier to install and disassemble, easy to maintain a reasonable design, large circulation area, smooth transition of diameter, no dirt accumulation phenomenon, less circulation resistance.
Elastic seal, 0 leakage, long service lifeThe valve inside and outside spray epoxy resin hengliaojing layer, the gate cladding rubber, does not pollute the medium. Small operating torque, easy opening and closing. Soft Seal Gate Valves can also be used as clearing valves. The disc above the DN300 caliber is equipped with a wedge-shaped plastic guide shoe (sliding boot structure) to reduce the operating torque and reduce the opening and closing to the rubber wear.

2. FEATURES

· Full bore design

· Self cleaning & low pressure loss

· Rolled stem ensure smooth thread edges and double thread

· Low operating torque

· Good and clear body marking

· Online replaceable under full pressure with valve fully opened; Three o-rings protects upper stem from impurities entering from the water way

· Every valve be 100% tested and qualified before packing and delivery

3. STANDARD

· Design & manufacturing:DIN3202-F5

· Face to face: EN558-1 series 3,14,15

· Flanged ends: ISO7005-2, EN1092-2, DIN2501 PN10/PN16

· Inspection & testing: EN12266-1

4. TECHNICAL SPECIFICATION

· Working pressure: PN10 / PN16 Bar

· Size: 2"-16"(DN50~300mm)

· Materials: cast iron, ductile iron

· Epoxy resin thickness: ≥250micron

· Applicable temperature: 0℃~+80℃

· Available with handwheel/square cap/gearbox/ electric actuator

5. APPLICATION

· Water supply system

· Waste water, sludge, sewage treatment industry

· Irrigation system

· Real estate industry

· Mining, steel industry

· Metallurgy plant, power plant

· Textile, pharmaceutical industry

· Food, pharmaceutical industry