DIN BS 4" Water Ductile Iron Mechanical Gate Valve Flanged

DIN/BS Ductile Iron Metal Seated Gate Valve DN50-DN1000

1. PRODUCT PROFILE

Metal seated gate valves are primarily designed for the flow isolation of a length of pipeline or piece of equipment. It uses a ductile iron gate that houses bronze rings to ensure a watertight seal. The non-rising stem design ensures the stem thread is adequately lubricated by the water passing through the valve. In essence, the whole internals are water dependent for lubrication, a factor that safeguards the longevity of the valve.

2. FEATURES

· Unique lightweight ductile iron design

· WRAS listed fusion bonded epoxy coated

· Stem seals replaceable under pressure

· Full bore design

· Ductile Iron body and bonnet for high strength and impact resistance

· Back seal facility to allow for replacement of seals under full operating pressure

· Fusion bonded polymeric coating for long life corrosion protection

· Isolated fasteners for corrosion protection

· Corrosion-resistant construction

· Integral feet to facilitate safe storage

· Robust low maintenance design suitable for buried service

3. STANDARD

· Design & manufacturing: EN1171/1074/DIN3202-F4/ F5/BS5163

· Flanges and Drillings: BS EN 1092-2

· Face to Face Dimensions: BS E  N 558

4. TECHNICAL SPECIFICATION

· Working pressure:PN10/PN16

· Temperature range -10°C to 80°C

· Designed according to EN 1074 part 1 & 2

· Standard flange drilling to EN1092-2 (ISO 7005-2), PN 10/16

· Hydraulic test according to EN 1074-1 & 2 / EN 12266

· Seat: 1.1 x PN (in bar), Body: 1.5 x PN (in bar)

· Approved for wastewater / pressure test EN 1074

5. APPLICATION

· Water supply system

· Waste water, sludge, sewage treatment industry

· Irrigation system

· Real estate industry

· Mining, steel industry

· Metallurgy plant, power plant

· Textile, pharmaceutical industry

· Food, pharmaceutical industry