Screw End Resilient Seated Water Gate Valves PN10 PN16

Superior Supplier Screw End Resilient Seated Gate Valve PN10/16

1. PRODUCT PROFILE

The valve uses the overall rubber covering of the gate to produce deformation compensation to achieve a good sealing effect, which overcomes the phenomenon of poor sealing, water leakage and rust of the general gate valve. The coefficient is small and the channel is smooth. Threaded ends resilient seat gate valves, used for drinking water connections, irrigation, civil facilities, etc.It has minimum head loss, and it is 100% watertight, full bore and repackable under pipeline pressure.

2. FEATURES

· Small fluid resistance

· Threaded gate valve with full bore.

· Low operating torque due to plastic sliding guides on the wedge.

· Maintenance-free and corrosion-resistant stem sealing.

· 100% tight sealing is achieved through EPDM covered wedge fully contacting the fusion bonded epoxy coated flow surface.

· Threaded connection

· Bidirectional flow.

· Minimal pressure drop.

· Detachable in load.

3. TECHNICAL SPECIFICATION

· Working pressure: PN10/16 Bar

· Size: DN15-DN50

· Materials: cast iron, ductile iron

· Epoxy resin thickness: ≥250micron

· Applicable temperature: 0℃~+80℃

· Available with handwheel

4. APPLICATION

· Water supply system

· Waste water, sludge, sewage treatment industry

· Irrigation system

· Real estate industry

· Mining, steel industry

· Metallurgy plant, power plant

· Textile, pharmaceutical industry

· Food, pharmaceutical industry