One straight coolant hole solid carbide rods with 45°chamfer

Specification: Ø3×50mm with straight hole Ø0.8mm

Type: wear rods

Application: wear rods such as shaft pins or cutting blanks.

Cobalt: 10%

Hardness: HRA 91.9

TRS 4200

Density: 14.45

Grain size: sub-fine grain size

Our advantage:

• For raw material:
• Constantly excellent WC powder produced by our own factory.
• Spray drying tower and HIP sintering furnace
• Cryogenic treatment to remove the internal stress
• For grinding:
• General h6 rods and h5 or h4 as required
• Straightness 0.01-0.05
• Circularity 0.01-0.05
• General Roughness Ra 0.4, and Ra 0.2 or Ra 0.05 as required.

What we can provide:

• Unground/Finished ground Solid carbide rods
• Cemented carbide rods with straight coolant holes
• Cemented carbide rods with helical coolant holes
• Cut-to-length rods
• End mills blank with 3/4/5 holes