Fixed Length Ground Solid Rod H6 Carbide Tool Blanks HRA 94.0

Price Negotiable

Price: negotiable

MOQ: 10pc

Delivery Time: Standard products in one week

Brand: OUQI

Product Description

Ground h6 solid carbide fixed-length drills blank HRA 94.0 with Nano grain size

Specification: OD Ø1.6mm, length 26mm.

Type: h5 ground solid carbide cut to length rods.

Application: Nano grain size, with high wear resistance and toughness, suitable for finishing of hardened steel, high-precision, and high-mirror processing of graphite. Good for making drills.

Recommend carbide grades for machining Aluminum:

Cobalt: 9%

Hardness: HRA 94.0

TRS 4200

Density: 14.45

Grain size: Nano grain size

Advantages of our tungsten carbide rods:

1. Extruded rod and HIP sintering.

2. Ultrafine particle size powder.

3. Runout and roundness can be less than 5 microns (0.005mm).

4. Carbide rods are solid or with straight/spiral coolant holes.

Grades for tungsten carbide rods:

Grade	ISO Code	Grain size μm	Cobalt %	Density g/cm3	Hardness		T.R.S
					HV30	HRA	N/mm2	KPSI
YF06	K05‐K10	0.5	6.0	14.90	1850	93.5	3800	553.9
YL10A	K10‐K20	0.8	8.0	14.65	1780	92.8	4200	609.5
YL10.2	K20‐K30	0.8	10.0	14.42	1600	91.5	4000	580
XF30	K30‐K40	0.6	12.0	14.10	1700	92.5	4000	580

Recommended Application

Grade	Application
YF06	Suitable for machining composite materials, such as aluminum‐magnesium alloys, plastics, reinforced plastics, carbon, fiber, iron‐based alloys, etc. It is recommended for making big PCB drills of ф3.2‐6.3mm, micro drills of ф0.8‐3.2mm, micro-milling tools and reamers, etc.
YL10A	It is suitable for machining cast iron, aluminum alloys, etc. also for machining common steels. It is recommended for the drilling of cast iron and aluminum alloys.
YL10.2	It is suitable for machining common steel, cast iron, stainless steel, heat‐resistant steel, nickel-based alloys, titanium alloys, etc. It is recommended for making conventional tools, such as twist drills, end drills, screw taps, etc.
XF30	It is suitable for machining titanium alloy, heat‐resistant alloys, stainless steel, hardened steel, grey cast iron, glass‐fiber Reinforced plastics, composite materials, etc. It is recommended to make drills and milling tools, etc.