Finished Ground Carbide Round Rod Blank H6 Ra 0.2 Cemented Carbide Tools

Price Negotiable

Price: negotiable

MOQ: 10pc

Delivery Time: Standard products in one week

Brand: OUQI

Product Description

What we can provide:

Unground/Finished ground Solid carbide rods
Cemented carbide rods with straight coolant holes
Cemented carbide rods with helical coolant holes
Cut-to-length rods
End mills blank with 3/4/5 holes

Specifications:

Diameter: 1.16mm in OD

Length 330mm or as required.

Type: Solid carbide rods.

Material 12% Cobalt with hardness HRA 92.5

Ultra-fine grain size

Application

With ultra-fine grain size and high hardness HRA 92.5, the carbide rods are widely used for making small PCB drill bits. It is suitable for machining titanium alloy, heat‐resistant alloys, stainless steel, hardened steel, grey cast iron, glass‐fiber Reinforced plastics, composite materials, etc. It is recommended to make drills and milling tools, etc.

Our finished ground rods could be h6/h5/h4 as per your requirements.

General tolerance for the h6 finished ground solid carbide rods
Diameter	Tolerance μm	Length	Tolerance	Straightness	Tolerance	Circularity	Tolerances
＜3.0	-6/0	＜100.0	+0.5/+1.0	＜4.0	0.07	<3,0	2,0 micron
3.0-6.0	-8/0	100.0-165.0	+1.0/+2.5	4.5-5.0	0.06	3,0- 6,0	2,5 micron
6.0-1.0	-9/0	165.0-335.0	+1.0/+6.0	5.5-12	0.05	6,1-10,0	3,0 micron
10.0-18.0	-11/0			＞12.5	0.04	10,1-18,0	3,5 micron
18.0-30.0	-13/0					18,1- 30,0	4,0 micron
30.0-50.0	-16/0					30,1- 50,0	5,0 micron

Available grades are as follows::

Grade	ISO Code	Grain size μm	Cobalt %	Density g/cm3	Hardness		T.R.S
					HV30	HRA	N/mm2	KPSI
YF06	K05‐K10	0.5	6.0	14.90	1850	93.5	3800	553.9
YL10A	K10‐K20	0.8	8.0	14.65	1780	92.8	4200	609.5
YL10.2	K20‐K30	0.8	10.0	14.42	1600	91.5	4000	580
XF30	K30‐K40	0.6	12.0	14.10	1700	92.5	4000	580

Recommended Application

Grade	Application
YF06	Suitable for machining composite materials, such as aluminum‐magnesium alloys, plastics, reinforced plastics, carbon, fiber, iron‐based alloys, etc. It is recommended for making big PCB drills of ф3.2‐6.3mm, micro drills of ф0.8‐3.2mm, micro-milling tools and reamers, etc.
YL10A	It is suitable for machining cast iron, aluminum alloys, etc. also for machining common steels. It is recommended for the drilling of cast iron and aluminum alloys.
YL10.2	It is suitable for machining common steel, cast iron, stainless steel, heat‐resistant steel, nickel-based alloys, titanium alloys, etc. It is recommended for making conventional tools, such as twist drills, end drills, screw taps, etc.
XF30	It is suitable for machining titanium alloy, heat‐resistant alloys, stainless steel, hardened steel, grey cast iron, glass‐fiber Reinforced plastics, composite materials, etc. It is recommended to make drills and milling tools, etc.