10% Cobalt Cemented Carbide Milling Blanks K1C 10.5 Cutting Rod Aluminum Alloy

Price Negotiable

Price: negotiable

MOQ: 10pc

Delivery Time: Standard products in one week

Brand: OUQI

Product Description

K1C 10.5 Cemented carbide milling blanks for cutting aluminum alloy with long service life

OD: 8mm -0.006

Length: 100mm +0.5

One end with chamfer.

ISO	Grain size	Cobalt	Density	Hardness	T.R.S	k1C
Code	μm	%	g/cm3	HRA	N/mm2	Mpa.m1/2
K40	0.8	10	14.45	91.8	3800	10.5

Application: Sub-fine grain size, processing by medium speed, good general performance, drill bits and end mills are recommended, suitable for cutting ordinary alloy steel, aluminum alloy, heat resistant alloy, cast iron etc.

Regular size for small drills:

Diameter mm		Length mm		Diameter mm		Length mm
D	Tolerance	L	Tolerance	D	Tolerance	L	Tolerance
1.60	+0/-0.006	20	0/+0.5	10.00	+0/-0.009	50	0/+0.5
2.35		30	0/+0.5	10.00		70	0/+0.5
2.35		45	0/+0.5	10.00		72	0/+0.5
3.00		60	0/+0.5	10.00		75	0/+0.5
4.00	+0/-0.008	40	0/+0.5	10.00		80	0/+0.5
4.00		46	0/+0.5	10.00		90	0/+0.5
4.00		50	0/+0.5	10.00		100	0/+0.5
4.00		60	0/+0.5	12.00	+0/-0.011	70	0/+0.5
4.00		75	0/+0.5	12.00		79	0/+0.5
4.00		100	0/+0.5	12.00		83	0/+0.5
5.00		50	0/+0.5	12.00		100	0/+0.5
5.00		60	0/+0.5	12.00		120	0/+0.5
5.00		100	0/+0.5	13.00		100	0/+0.5
6.00		40	0/+0.5	14.00		75	0/+0.5
6.00		50	0/+0.5	14.00		80	0/+0.5
6.00		58	0/+0.5	14.00		83	0/+0.5
6.00		60	0/+0.5	14.00		100	0/+0.5
6.00		67	0/+0.5	16.00		80	0/+0.5
6.00		75	0/+0.5	16.00		90	0/+0.5
6		100	0/+0.5	20.00	+0/-0.013	100	0/+0.5
8	+0/-0.009	50	0/+0.5
8		60	0/+0.5
8		63	0/+0.5
8		75	0/+0.5
8		90	0/+0.5
8		100	0/+0.5

General Tolerance for ground carbide rods

General tolerance for the h6 finished ground solid carbide rods
Diameter	Tolerance μm	Length	Tolerance	Straightness	Tolerance	Circularity	Tolerances
＜3.0	-6/0	＜100.0	+0.5/+1.0	＜4.0	0.07	<3,0	2,0 micron
3.0-6.0	-8/0	100.0-165.0	+1.0/+2.5	4.5-5.0	0.06	3,0- 6,0	2,5 micron
6.0-1.0	-9/0	165.0-335.0	+1.0/+6.0	5.5-12	0.05	6,1-10,0	3,0 micron
10.0-18.0	-11/0			＞12.5	0.04	10,1-18,0	3,5 micron
18.0-30.0	-13/0					18,1- 30,0	4,0 micron
30.0-50.0	-16/0					30,1- 50,0	5,0 micron

General tolerance for the h5 finished ground solid carbide rods
Diameter	Tolerance μm	Length	Tolerance	Straightness	Tolerance	Circularity	Tolerances
＜3.0	-4/0	＜100.0	+0.5/+1.0	＜4.0	0.07	<3,0	2,0 micron
3.0-6.0	-5/0	100.0-165.0	+1.0/+2.5	4.5-5.0	0.06	3,0- 6,0	2,5 micron
6.0-1.0	-6/0	165.0-335.0	+1.0/+6.0	5.5-12	0.05	6,1-10,0	3,0 micron
10.0-18.0	-8/0			＞12.5	0.04	10,1-18,0	3,5 micron
18.0-30.0	-9/0					18,1- 30,0	4,0 micron
30.0-50.0	-11/0					30,1- 50,0	5,0 micron

Our tungsten carbide rods:

100% virgin material, no recycled material
Spray drying tower and HIP sintering furnace
Constant excellent quality
Large stock for all sizes, the regular products can be shipped in 3 days, and the special rods can be ground in one week.
100% inspected before delivery. The inspection including raw material and dimension report will be sent you before delivery
Excellent grinding quality, Straightless and circularity could be 0.05 or 0.02.