Replace V4043A1705 Honeywell V4043 Motorised Valve
Replace V4043A1705 Honeywell V4043 Motorised Valve
Two way on-off line voltage valves consist of an actuator motor and valve assembly for controlling the flow of hot or chilled water.
Application: Hydronic Control
Dimensions (in.): 4 in. high x 3 23/32 in. wide x 2 3/8 in. deep
Dimensions (mm): 102 mm high x 94 mm wide x 60 mm deep
Frequency: 60 Hz
Parameters of Honeywell V4043 Motorised Valve
| Item | Replace V4043A1705 Honeywell V4043 Motorised Valve |
| Size: | 3/4" |
| Width (Inches): | 3-23/32" |
| Depth (Inches): | 2-3/8" |
| Height: | 4" |
| Material: | Brass |
| Flow Capacity (Cv): | 3.5 |
| Position: | Normally Closed |
| Voltage: | 120v |
| Capacity: | 3.5 Cv |
| Wiring: | 18" Leads |
| Body Pattern: | 2-Way |
| Hertz: | 60 |
| Max Ambient Temp (°F): | 125°F |
| Max Close-Off PSI: | 20 psi |
| Temperature Range (F): | 40°F - 200°F |
| Max Temp (F): | 200°F |
| Min Temp (F): | 40°F |
| Connection Type: | Threaded |
| Valve Action: | Spring Return to Close |
| Power Consumption: | 9.6 VA |
| Nominal Timing: | 15 Seconds |
| Static Pressure: | 125 psi |
| End Switch: | No |
Features of Honeywell V4043 Motorised Valve
- Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored.
- All models may be installed without disassembling the valve.
- Motor may be replaced without removing the valve body or draining the system.
- Suitable for heating and cooling applications
Note: Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water.
Two way on-off line voltage valves consist of an actuator motor and valve assembly for controlling the flow of hot or chilled water.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.