380V Aluminium Roofing Sheet Making Machine 0.3mm Tile Forming Equipment
380V 5.5kw Galvanized Steel Roofing Forming Machine With Hydraulic Cutting
1. Description of Roofing Forming Machine
Steel frame machine is used to make the steel frames, the skeleton frame, the vertical steel columns and metal horizontal i beams, and retangular grid, to support the floors and roof.There are Omega frame roll forming machine, L corner bead wall protector roll forming machine, c track frame roll forming machine and u stud frame rol forming machine, and T bar frame roll forming machines.
2. Specifications of Roofing Forming Machine
| No. | Main parameter of the machine for reference | |
| 1 | Suitable to process | Color steel plate |
| 2 | Width of the plate | 1000/1220/1250mm |
| 3 | Thickness of the plate | 0.3-0.8mm |
| 4 | De-coiler | Manual one, can load 5 tons raw material |
| 5 | Rollers for forming | 11-18 rows |
| 6 | Diameter of the roller | 70-80mm |
| 7 | Rolling material | Carbon Steel 45# |
| 8 | Main motor power | 4kw |
| 9 | Productivity | 8-12m/min |
| 10 | Cutting method | Hydraulic mould cutting |
| 11 | Material of the cutting blade | Cr12mov |
| 12 | Hydraulic cutting power | 3kw |
| 13 | Processing precision | Within 1.00mm |
| 14 | Control system | Delta PLC control |
| 15 | Side panel of machine | 14mm |
| 16 | Main structure of the machine | 300 H steel |
| 17 | Weight | About 3.5T |
| 18 | Dimensions | more than 6.5*1.9*1.25m |
| 19 | Voltage | 380V 3phases 50hz |
| 20 | Certificate | CE/ISO/TUV |
| Customized according to customer requirements | ||
3. Feathers of Roofing Forming Machine
- Normally at the coil feeding system, we will give manual cutter then you can remove the untidy part coil or cut at any length.
- We Will use the rubber roller at leveling part to protect the coil surface.
- We will add two more gears for feeding coil smoothly.
- For the roller, we will do the chroming for long time use and beautiful.
- For cutting, we use 4 pillar post cutting system to make sure the cutter can use long time.
- Use special special design of cutting system for cutting fast and the cutter can use long time.
- Good quality hydraulic jacks.
- Use strong thickness frame and holder.
- We will give remoter for control machine easily.
4. Production Flow of Roofing Forming Machine
Manual decoiler→Feeding material into machine→Roll forming machine→Measure length→Hydraulic cutting→Finished Products
5. Details of Our Roofing Forming Machine
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.