2Nm3/H Medical Oxygen Plant 90% To 96% PSA O2 Generator

Description

The PSA oxygen generator is mainly composed of two adsorption towers filled with molecular sieves. Under normal temperature conditions, the compressed air is filtered, dewatered and dried before entering the adsorption tower. The nitrogen in the air in the adsorption tower is removed by the molecular sieve. Adsorption, so that oxygen is enriched in the gas phase, flows out from the outlet and is stored in the oxygen buffer tank, and the molecular sieve that has completed the adsorption in the other tower is rapidly depressurized, and the adsorbed components are resolved, and the two towers alternately circulate, that is Inexpensive oxygen with a purity of ≥90% is available. The valve automatic switching of the whole system is automatically controlled by a computer.

Parameter

Safety Precautions:

1. Cut off the power supply of the psa oxygen generator, and only after it has been suspended can it be overhauled;

2. During maintenance, it is necessary to ensure ventilation and sufficient oxygen content in the workplace to avoid nitrogen entering directly into people's mouth and nose;

3. When hot work is required, a hot work permit must be obtained and approved according to regulations;

4. When using cranes and other lifting appliances, there must be a special person to direct them, and the ropes must be fastened firmly;

5. Maintenance tools, dismantling, cleaning and replacing parts should be neatly placed in the specified places and constructed in a civilized manner.