Aluminum Case Durable LED Strip Power Supply 24V 12V LED Strip Transformer
Aluminum Case Durable LED Strip Transformer LED Power Supply
Features
* Constant voltage style power supply
* Universal AC input/Full range(25W~120W); European AC input range(150W~300W)
* Single output ,stable voltage,adjustable voltage
* Protections: short circuit, over load, over voltage and over temperature
* Fanless and conduction-cooled design
* IP rating :IP20 indoor use
* 100% full load burn-in test
* Durable Aluminum base, pass EMI test EN 55032
* LED indicator for power on
* CE& RoHS certifications
* 3 years warranty
Specifications
| Keyword: | LED transformer LED power supply | Efficiency: | 83% |
| Output Type: | Single | Feature: | Stable output slim size |
| Input Voltage: | 110-264VAC/120-370VDC | Material: | Aluminum Housing |
| Output Voltage: | 12V | Protections: | Short Circuit Overload Overvolt |
| Output Frequency: | 50Hz | Packing: | White Box + Carton |
| Output Current: | 0~2.1A | Usage: | LED strip lighting |
| Certification: | CE ROHS | Output Power: | 1 - 50W |
| Warranty: | 3 Years | IP Rate: | 20 |
Description
| Output | DC voltage | 12V | 24V | ||||
| Rated Current | 2.1A | 1.0A | |||||
| Current Range | 0-2.1A | 0-1A | |||||
| Rated Power | 25W | 25W | |||||
| Ripple and Noise(Max)Note.2 | 150mVp-p | 240mVp-p | |||||
| Voltage adjustment | 10.8-13.2V | 22-27.6V | |||||
| Voltage tolerance Note3 | ±1% | ±1% | |||||
| Linear Regulation Note4 | ±0.5% | ±0.5% | |||||
| Load Regulation Note5 | ±0.5% | ±0.5% | |||||
| Setup and rise time | 1000ms,30ms/230VAC 1000ms,30ms/110V | ||||||
| Hold up time(Typ) | 50ms/230VAC 10ms/115AC | ||||||
| Input | Voltage range | 100-240VAC | |||||
| Frequency range | 47-63HZ | ||||||
| Efficiency(Typ) | 80% | 81% | |||||
| AC current (Typ) | 0.57A/100V 0.23A/220V | ||||||
| Surge (Inrush) current (Typ) | Cold start:65A/230VAC | ||||||
| Leakage Current | <2mA/240VAC | ||||||
| Protection | Overload | >105% rated output power | |||||
| Protection type:Hiccup mode, recovers automatically after fault condition is removed | |||||||
| Over temperature | Overheat protection starts when temperature in transistor over 140℃ | ||||||
| Recovers automatically after temperature is normal. | |||||||
| Environment | Working temp. | -20～+50℃(Please refer to the attenuation curve) | |||||
| Working humidity | 20～90% RH,Non-condensing | ||||||
| Storage temp & hmdty | -40～+80℃ | ||||||
| Temp. coefficient | ±0.03%/℃ (0～50℃) | ||||||
| Vibration proof | 10～500HZ,5G 10min/1 cycle,period for 60min. each along X,Y,Z axes | ||||||
| Safety reg. & EMC (Note.6) | Safety regulation | GB195110.1-2004/IEC61347-1:2003 CE(EMC+LVD) | |||||
| Voltage proof | I/P-O:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | ||||||
| Isolation resistance | I/P-O/P, I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/70% RH | ||||||
| EMC irradiation | EN 55022A:2006;EN61000-3-2:1995+A2:2005 | ||||||
| EMC disturbance proof | EN 61000-3-2:2006; | ||||||
| Others | Dimensions | 115x40x25mm(L*W*H) | |||||
| Packing | 0.14kg/PCS;150PCS/20.55kg | ||||||
| Remark | 1. Unless specially indicated, all data are taken under 230VAC input, rated load and 25℃ environment temp. | ||||||
| 2.Ripple and noise: measured with a 12” double ripple cord connected in parallel with a 0.1μF and a 47 μF capacitor on 20MHz | |||||||
| bandwidth. | |||||||
| 3.Tolerance(Accuracy): including preset errors, linear adjustment rate and load adjustment rate. | |||||||
| 4.Linear adjustment: taken under rated load from low voltage to high voltage. | |||||||
| 5.Load adjustment: taken under 0~100% of rated load. | |||||||
| 6. Power supply is taken as part of the whole system, and needs to be confirmed with terminal instruments for EMC. | |||||||
Advantage:
- Protections:short circuit/over load/over voltage/over temperature
- IP67 design for indoor or outdoor installation
- It can be used in dry ,wet and rainy environment Cooling by free air, high reliability
- 100% full load burn-in test
- Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ. Widely used in LED lighting and IT equipment
- IS 15885(Part2/Sec13)
- Compliance to worldwide safety regulation for led lightings.
FAQ
Q1. Can I have a sample order for led strip light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-7 days, mass production time needs 4-5 weeks.
Q3. Do you have any MOQ limit for led strip light order?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.