12V 24V 5V Switching Power Supply 1A 1.25A 2A 3A 5A 10A
12v 24v 5v 1a 1.25a 2a 3a 5a 10a Switching Power Supply
Technical parameter:
INPUT voltage:AC(Communication)100-240V~50/60Hz
OUTPUT:DC 5V12V24V
AC Cable:EU, United States/Japan/China, Australia/New Zealand, UK/Hong Kong, South Africa
DC Connector:5.5*2.5/5.5*2.1,[Customizable4.0*1.7,3.5*1.35,,2.5*0.7mm]
Power polarity: inward positive, outward negative, inward negative (special polarity can be ordered as needed)
Warranty:2 Years
If you don't know whether this machine can use this adapter, you can view your
original adapter's output parameters (Output voltage, current) whether
suitable, if the original adapter lost, or you can look at the electronic equipment
at the bottom of the parameters of the machine specifications
Specification
| Product Name: | Switching Power Supply | Output Frequency: | 50/60 |
| Output Power: | 0-720W | Output Current: | 1-70A |
| Output Type: | DC | Output voltage: | 5V 12V 24V |
| Input Voltage: | 110-240V | Warranty: | 2 Years |
| Output Voltage: | 5V 12V 24V | Type: | AC-DC |
| Output current: | 1-70A | Input voltage: | AC100~240V 50/60Hz |
Constant Voltage Power Supplies
A constant voltage power supply can be used to power LED lights that have resistors or constant current drivers already within the system. These types of products will typically call for a constant DC voltage. If you are powering from a battery or happen to have a constant DC voltage that is adequate for your lights, then consider yourself lucky. Nine times out of ten this will not be the case and you will need a power supply to convert your power to a safe DC voltage for your lights. For example, LED flex strips have on-board current limiting resistors (as LED-flex-strip-on-board-resistorsyou can see built onto the flex board base). If you wanted to install this in your car, you wouldn’t need any power supply. Cars batteries give off 12VDC give or take. The 12V supply from the battery would be totally adequate for your lights. But in order to incorporate these strips in homes there is the need for an AC to DC converter that will take the 120VAC standard household voltage and convert it down to 12VDC.
FAQ
1) Q: Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. mixed samples are acceptable.
2) Q: What is the lead time?
A: Samples need 2-3 working days, mass products need 3-5 days(According to your quantity.)
3) Q: How do you ship the goods and how long does it take arrive>
A: Express ( DHL/UPS/ FedEx/ TNT). Air or Sea shipment is available depends on your need.
It usually takes 3-5 days to arrive except Sea transportation.
4) Q: How to precede the order if i have logo to print?
A: Firstly, we will prepare artwork for visual confirmation,
and next we will produce a real for your second confirmation,
if mockup is ok, finally we will go to mass production.
5) Q: How to deal with the faulty?
A: Firstly, our defective rate is less than 0.2%, so there is no big problem to the lihght.
Secondly, we usually offer 3-5 years warranty for our lights
Tirdly, duringthe guarantee period, we will resend new lights with the new order for small quantity,
if there are many lights don't work, we can repair them, then resend them to you.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.