High Efficiency 90% 5V 40A 200W Switching Power Supply For LED Pixel Light
High Efficiency 90% 5V 40A 200W Switching Power Supply For Led Pixel Light
Product Description
1.International AC input range
2.High efficiency,low working temperature
3.Short circuit,overload,over-current protection
4.100% fully load burn-in test
5.Built-in EMI filter, low ripple noise
6.Low cost, high reliability
7.CE and Rohs approval
8.OEM and ODM is welcome
Product Specification
| OUTPUT | DC VOLTAGE | 5V |
| RATED CURRENT | 40A | |
| CURRENTRANGE | 0~40A | |
| RATED POWER | 200W | |
| RIPPLE & NOISE (max.) Noto.2 | 100mVp-p | |
| VOLTAGE ADJ. RANGE | 4.15~5.5V | |
| VOLTAGE TOLERANCE Noto.3 | ±1.0% | |
| LINE REGULATION | ± 0.3% | |
| LOAD REGULATION | ± 0.5% | |
| SETUP, RISE TIME | 500ms, 100ms | |
| HOLD UP TIME CTyp-) | 10ms | |
| INPUT | VOLTAGE RANGE Noto.4 | 165Vac-275Vac |
| FREQUENCY RANGE | 47-63Hz | |
| EFFICIENCY fTyp.) | 89% | |
| AC CURRENT (Typ.) | 1.1A/230VAC | |
| INRUSH CURRENT (TVp.) | 40A/230VAC | |
| LEAKAGE CURRENT | <1mA/240VAC | |
| PROTECTION | OVERLOAD | 105 -135% rated output power |
| Protection type: Hiccup mode, recovers automatically after fault condition is removed | ||
| OVERVOLTAGE | 5.5~6.5V | |
| Protection type: Shutdown o/p voltage, re-power on to recover | ||
| ENVIRONMENT | WORKING TEMP. | -30 ~ +70nC (Referto "Derating Curve") |
| WORKING HUMIDITY | 20~90% RH non-condensing | |
| STORAGE TEMP., HUMIDITY | -40~+85°C,10~95%RH | |
| TEMP. COEFFICIENT | ±0.03%/°C (0~50°C) | |
| VIBRATION | 10- 500Hz, 2G10min./1 cycle, 60min. each along X, Y, Z axes | |
| SAFETY | SAFETY STANDARDS | GB4943, UL60950, EN60950 |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC/3mA/1min | |
| I/P-FG:1.5KVAC/3mA/1min | ||
| O/P-FG:0.5KVAC/3mA/1min | ||
| ISOLATION RESISTANCE | I/P-O/P:100MΩmin/500VDC | |
| CERTIFICATIONS | CQC/ CE/ CB/ ROHS/ CCC/ BIS | |
| DIMENSION | 190*82*31mm(L*W*H) | |
| NOTE | 1. The product should be suspended in air or placed on the face of metal when assembled, and be avoided to place on the face of non-conducting heat materials such as, plastics, board and so on. 2.Storage: It will be better that the product store in the environment temperature between -10℃ and +80℃ as well as the humidity less than 80%RH. Make sure that there is no corrosive gases in the store environment. Besides, the surrounding must not have the strong mechanical vibration and high-intensity magnetic field. And the case have to be block up at least 25cm away from the earth. The regulation mentioned above will let the products store for 2 years, power supply should be tested after 2 years. | |
Advantages
• High efficiency up to 89%
• Protections: Short circuit/ Overload / Over voltage / Over current
• Cooling by free air convection
• Built-in the IC imported from ON Semiconductor and Texas Instrument
• 100% full load burn-in test
• 3 years warranty
Application
1. Digital and electronic products
2. 3D Printer
3. Fiber transceivers, game player, LED, CCTV camera
4. Electrical equipment, Instrumentation
5. Industrial equipment
6. Communications and security products;
7. LED Strip Lighting/ LED lamp / LED Lights
8. LED Display, etc.
FAQ
Q1. Can I have a sample order for LED Power Supply?
A: Yes, sample order for testing and reviewing our quality is available. Mixed samples are acceptable.
Q2. What about the lead time?
A: Samples order: 1-3 days, mass production time are normally in 25days after deposit.
Q3. What is your MOQ of the LED power supply?
A: 50pcs or 100pcs for trial order.
Q4:How many year warranty of your Led driver?
A: Two years.
Q5: OEM/ODM available:
A:1.print logo on the sickers or LED powers.
2.Any request on the power supply, we can help you to design and put it into production.
Q6: What kinds of certificate we achieve?
A:CE, ROHS, FCC.
Q7: How to ship these goods?
A:By airline or by sea.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.3%.
Secondly, during the guarantee period, we will send new power supply with new order together. For defective batch products, please send the pictures or videos for them, if possible, we can discuss the solution according to real situation.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.