316Ti Stainless Steel Flat Bar UNS S31635 Stainless Steel Flat Stock
316Ti Stainless Steel Flat Bar UNS S31635 Stainless Steel Flat Stock
Description
316Ti is an austenitic stainless steel; it is a derivative of 316 stainless steel with titanium stabilization. In theory, 316Ti is type 316. After heating in the temperature range of 425-815 ° C, titanium is added to 316 stainless steel to enhance the resistance to intergranular corrosion.
316Ti stainless steel is widely used in chemical equipment, mechanical parts used under corrosion-resistant conditions, bolts and nuts, pressure vessels
- Material:Metal, Alloy Flat Bar, 316Ti Stainless Steel Flat Bar UNS S31635 Stainless Steel Flat Stock
- Shape:Stainless Steel Flat Bar
- Round bar / Wire rod (Diameter): 5.5mm to 800mm
- Square bar / Flat bar: 5.5mm to 800mm
- Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
- Heavy/middle plate via hot rolled: T5 - 200mm X W10 - 1500mm X L1000-12000mm
- Sheet steel via cold rolled: T1.0 - 6mm X W6 - 1000mm X L1000 - 2000mm
- Steel strip via cold rolled: T0.3 - 5mm X W5 - 200mm X L (or in coil form)
- Length: Fixed length or random length or based on the customer's special requirement.
Products Details
Chemical Composition (weight%):
| 316Ti/S31635 | SUS 316Ti |
|
ASTM A240/240M-2018
|
JIS G 4305-2021 |
|
C(％): ≤0.08
Si(％): ≤0.75 Mn(％): ≤2.0 P(％): ≤0.045
S(％): ≤0.030
Cr(％): 16.0~18.0 Ni(％): 10.0~14.0 Mo(％): 2.0~3.0 N(%): ≤0.1
Ti(％): 5(C+N)~0.70 |
C(％): ≤0.08
Si(％): ≤1.0 Mn(％): ≤2.0 P(％): ≤0.045
S(％): ≤0.030
Cr(％): 16.0~18.0 Ni(％): 10.0~14.0 Mo(％): 2.0~3.0 Ti(％): ≥5xC |
| STS 316Ti | CNS 316Ti |
|
KS D3706(2006)
|
CNS 3270(2006) |
|
C(％): ≤0.08
Si(％): ≤1.0 Mn(％): ≤2.0 P(％): ≤0.045
S(％): ≤0.030
Cr(％): 16.0~18.0 Ni(％): 10.0~14.0 Mo(％): 2.0~3.0 Ti(％): ≥5xC |
C(％): ≤0.08
Si(％): ≤1.0 Mn(％): ≤2.0 P(％): ≤0.035
S(％): ≤0.020
Cr(％): 16.5~18.5 Ni(％): 10.5~13.5 Mo(％): 2.0~2.50 Ti(％): 5xC~0.70 |
Mechanical Properties Under Final Heat Treatment:
TS, σb/≥MPa: 520
YS, σ0.2≥/MPa: 205
EL, δ 5≥(％): 40
Reduction of area, ψ/%: --
Impact, AKV≥/J: --
Hardness HB: ≤217
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of raw materials and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging, we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order as the start of our cooperation, we can accept smaller quantities at the first time. Of course, after the start, we will have further and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing, DHL/FedEx/UPS accounts can be used for sampling, and the courier fee is borne by you.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.