1.4313 DIN X3CrNiMo13-4 Stainless Steel Sheets Plates AISI 415 UNS S41500 Strip
1.4313 DIN X3CrNiMo13-4 Stainless Steel Sheets Plates AISI 415 UNS S41500 Strip
Product Information
X3CrNiMo13-4/1.4313 is a martensitic stainless steel with a high concentration of molybdenum and nickel in its chemical composition giving it good mechanical properties. The nickel content is about 4% - a small amount that can significantly increase the steel's resistance to many corrosive environments - second only to mechanical properties.
Size Range
Round bar / Wire rod (Diameter): 5.5mm to 500 mm
Square bar / Flat bar: 1.0 mm to 500 mm
Forging piece: Stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Heavy/middle plate via hot rolled: T3 - 1000 mm X W10 - 1000 mm X L800-12000 mm
Sheet steel via cold rolled: T5.0 - 10 mm X W10 - 1000 mm X L100 - 1000 mm
Steel strip via cold rolled: T1 - 10 mm X W10 - 1000 mm X L (or in coil form)
Length: Fixed length or random length or based on the customer's special requirement.
Chemical Composition and standard
|
|
AISI 415/UNS S41500 |
BS 425C11 |
|
DIN EN 10088-3-2014 |
ASTM A276/A276M-2017 | NF EN 10084-2008 |
|
|
C(％): ≤0.05 |
C(％): ≤0.1 Si(％): ≤1.0 Mn(％): ≤1.0 P(％)≤: 0.04 S(％)≤: 0.03 Cr(％): 11.5~13.5 Ni(％): 3.4~4.2 Mo(%): ≤0.6 |
X3CrNiMo13-4/1.4313 Mechanical Properties
Tensile strength, Rm/MPa: ≥795
Yield strength, Rp/MPa: ≥620
Elongation/%: ≥15
Reduction of area, ψ/%: ≥45
Hardness, HBW: ≤296
Applications
X3CrNiMo13-4/1.4313 is used in the manufacture of components for the petroleum, chemical, metallurgical and energy industries
If you are interested in our products or have any questions, please contact our team of engineers at
sales@ss-bars.com
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.