UNS S41500 Stainless Steel Round Bar DIN X3CrNiMo13-4 For Engineering
UNS S41500 Stainless Steel Round Bar DIN X3CrNiMo13-4 Round Bar 1.4313 Ground bar
Description
Our company provides UNS S41500 Stainless Steel Round Bar X3CrNiMo13-4 Hot forged 1.4313 Ground bar ASTM A959-2004.
All of UNS S41500 Stainless Steel Round Bar X3CrNiMo13-4 Hot forged 1.4313 Ground bar ASTM A959-2004 conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
- Material:Metal,Stainless Steel Round Bar,UNS S41500,X3CrNiMo13-4,1.4313.
- Executive Technical Standards: GB / ISO / DIN / NF / BV / BS / JIS / JASO / NDS / ASTM / SAE / UNS / AISI etc.
- Metal Type:Martensitic stainless steel series.
- Shape:Stainless Steel Round Bar
- Round bar / Wire rod (Diameter):5.5mm-800mm
- Length: Fixed length or random length or based on the customer's special requirement.
- Surface:Black,Bright or According To Customer Demand.
- High Light:Stainless Steel Round Bar,UNS S41500 Stainless Steel Round Bar.
Packing details:
Products are well packed and clear labeled according to the regulations and customer's requests.
Intact packages are able to avoid any damage which might otherwise be caused during storage or transportation.
Products Details
UNS S41500 Stainless Steel Round Bar X3CrNiMo13-4 Hot forged 1.4313 Ground bar ASTM A959-2004
| Chemical Composition (weight%): | Mechanical Properties Under Final Heat Treatment: |
| C (％): ≤ 0.05 Si (％): ≤ 0.60 Mn (％): 0.50 - 1.00 P (％)≤: 0.030 S (％)≤: 0.030 Cr (％): 11.5 - 14.0 Ni (％): 3.50 - 5.50 Mo (％): 0.50 - 1.00 |
Condition: tempering Tensile strength, σb/MPa: 795 Yield strength, σ0.2/MPa: 620 Elongation, δ (％): 15.0 Reduction of area, ф(％): - Hardness | HRB: 32HRC Form: bar,forging piece Condition: tempering Tensile strength, σb/MPa: 795 Yield strength, σ0.2/MPa: 620 Elongation, δ (％): 15.0 Reduction of area, ф (％): 45.0 Hardness | HRB: - |
UNS S41500 Stainless Steel Round Bar X3CrNiMo13-4 Hot forged 1.4313 Ground bar ASTM A959-2004
| Technical Standard | Equivalent Grade |
| ISO/TS 16143-2(2004) | X3CrNiMo13-4 |
| JIS G3214(1991) | SUS F6NM |
| KS D4115(2001) | STS F6NM |
| DIN EN 10088-2(2005) |
X3CrNiMo13-4/1.4313 |
| NF EN 10088-2(2005) | X3CrNiMo13-4 |
| BS EN 10088-2(2005) | X3CrNiMo13-4 |
| BS 3100(1991) | 425C12 |
| ASTM A959(2004) | S41500 |
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of raw materials and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging, we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order as the start of our cooperation, we can accept smaller quantities at the first time. Of course, after the start, we will have further and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing, DHL/FedEx/UPS accounts can be used for sampling, and the courier fee is borne by you.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.