DIN X6Cr13 DIN 1.4000 Turbine Blade Steel Round Steel Bar
DIN X6Cr13 DIN 1.4000 Turbine Blade Steel DIN X6Cr13 Round Bar DIN 1.4000 Flat Bar
Description
Our company provides DIN X6Cr13 DIN 1.4000 Hot Rolled / Cold Rolled Turbine Blade Steel DIN X6Cr13 Ground /Peeled Round Bar DIN 1.4000 Forged Flat Bar.
All of DIN X6Cr13 DIN 1.4000 Hot Rolled / Cold Rolled Turbine Blade Steel DIN X6Cr13 Ground /Peeled Round Bar DIN 1.4000 Forged Flat Bar conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
- Material:Metal,Turbine Blade Steel,DIN X6Cr13 DIN 1.4000.
- Shape:Turbine Blade Steel.
- Round bar / Wire rod (Diameter): 5.5mm to 800mm
- Square bar / Flat bar: 3mm to 800mm
- DIN X6Cr13 DIN 1.4000 Hot Rolled / Cold Rolled Turbine Blade Steel DIN X6Cr13 Ground /Peeled Round Bar DIN 1.4000 Forged Flat Bar Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Products Details
DIN X6Cr13 DIN 1.4000 Hot Rolled / Cold Rolled Turbine Blade Steel DIN X6Cr13 Ground /Peeled Round Bar DIN 1.4000 Forged Flat Bar.
|
Chemical Composition (weight%): |
||||||||
|
C(％): ≤0.08 |
Si(％): ≤1.00 |
Mn(％): ≤1.00 |
P(％): ≤0.040 |
S(％): ≤0.030 |
Cr(％): 11.0-14.50 |
Ni(％): ≤0.50 |
Mo(％): - |
Al (％): 0.10-0.30 |
| Mechanical Properties Under Final Heat Treatment: | |||||
| Tensile strength, σb/MPa: 415 | Yield strength, σ0.2/MPa: 170 | Elongation, δ(％): 20.0 |
Reduction of area, ф(％): - |
Hardness | HBW: 179 Hardness | HRB: 88 |
Cold bending property: N |
Applications:
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel
| Equivalent Grade |
| SUS 405 |
| STS 405 |
| X04Cr13 |
|
X6Cr13/1.4000 |
| Z6CA13 |
| 403S17 |
| 405/S40500 |
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of DIN X6Cr13 DIN 1.4000 Hot Rolled / Cold Rolled Turbine Blade Steel DIN X6Cr13 Ground /Peeled Round Bar DIN 1.4000 Forged Flat Bar. and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging, we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order as the start of our cooperation, we can accept smaller quantities at the first time. Of course, after the start, we will have further and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing, DHL/FedEx/UPS accounts can be used for sampling, and the courier fee is borne by you.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.