XM-12 Turbine Blade Steel UNS S15500 15-5PH
XM-12 Turbine Blade Steel UNS S15500 15-5PH
Description
XM-12 Turbine Blade Steel UNS S15500 15-5PH is a martensitic, precipitation-hardening material with chromium, nickel and copper. XM-12 Turbine Blade Steel UNS S15500 15-5PH is often a first choice in the aerospace industry for fasteners and structural components.
All of XM-12 Turbine Blade Steel UNS S15500 15-5PH conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
- Material:Metal,Turbine Blade Steel, XM-12 Turbine Blade Steel UNS S15500 15-5PH
- Shape:Turbine Blade Steel
- Round bar / Wire rod (Diameter): 5.5mm to 800mm
- Square bar / Flat bar: 3mm to 800mm
- Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
- Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
- Sheet steel via cold rolled: T0.5 - 6mm X W6 - 1000mm X L1000 - 2000mm
- Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
- Length: Fixed length or random length or based on the customer's special requirement.
Products Details
XM-12 Turbine Blade Steel UNS S15500 15-5PH
| Chemical Composition (weight%): | Mechanical Properties Under Final Heat Treatment: |
| C (％): ≤ 0.07 Si (％): ≤ 1.00 Mn (％): ≤ 1.00 P (％)≤: 0.040 S (％)≤: 0.030 Cr (％): 14.0 ~ 15.5 Ni (％): 3.50 ~ 5.50 Cu (％): 2.50 ~ 4.50 Nb+Ta (%): 0.15 ~ 0.45 |
Solution treatment temperature and cooling ways: 1038 +/-15℃ Steel plate thickness /mm: 0.038 ~ 101.6 Tensile strength, σb≥/MPa: - Yield strength, σ0.2≥/MPa: - Elongation, δ≥(％): - Hardness ≤|HRC: 38 Hardness ≤|HBS: 363 |
Applications:
XM-12 Turbine Blade Steel UNS S15500 15-5PH used most often in the Aerospace applications, Fasteners, Oil & Gas applications, Power generation, Valves, gears and pumps, Food processing.
| Technical Standard | Equivalent Grade |
| ISO/TS 15510(2003) | X6Cr13 |
| JIS G4303(2005) | SUS 405 |
| KS D3706(2006) | STS 405 |
| IS 6527(2001) | X04Cr13 |
| DIN EN 10088-1(2005) |
X6Cr13/1.4000 |
| NF EN 10088-2(2005) | X6Cr13 |
| NF A35-573(1984) | Z6CA13 |
| BS 970-1(1996) | 403S17 |
| ASTM A959(2004) | 405/S40500 |
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of raw materials and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging, we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order as the start of our cooperation, we can accept smaller quantities at the first time. Of course, after the start, we will have further and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing, DHL/FedEx/UPS accounts can be used for sampling, and the courier fee is borne by you.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.