Aircraft Steel D6AC Stainless Steel Round Bar
Aircraft steel D6AC Stainless Steel Round Bar
Description
Aircraft steel D6AC Stainless Steel Round Bar is vacuum melted, medium carbon, low alloyed, and ultra-high-strength steel. Aircraft steel D6AC Stainless Steel Round Bar is used for high-strength applications like aircraft structures with strength levels up to 280,000 psi. With proper tempering, yield strength and hardness of this grade can reach up to 1750 MPa, and 53HRC respectively.
All of Aircraft steel D6AC Stainless Steel Round Bar conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
- Material:Metal, Aircraft steel D6AC Stainless Steel Round Bar
- Shape: Stainless Steel Round Bar
-
Round bar / Wire rod (Diameter): 5.5mm to 800mm
-
Square bar / Flat bar: 3mm to 800mm
-
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
-
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
-
Sheet steel via cold rolled: T0.5 - 6mm X W6 - 1000mm X L1000 - 2000mm
-
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
- Length: Fixed length or random length or based on the customer's special requirement.
Products Details
Aircraft steel D6AC Stainless Steel Round Bar
| Chemical Composition (weight%): | |
| C (％): 0.42 ~ 0.48 Si (％): 0.15 ~ 0.35 Mn (％): 0.60 ~ 0.90 P (％)≤: 0.015 S (％)≤: 0.015 Cr (％): 0.90 ~ 1.20 Ni (%): 0.40 ~ 0.70 Mo (％): 0.90 ~ 1.10 V (%): 0.05 ~ 0.10 |
|
| Mechanical Properties Under Final Heat Treatment: | |
| Condition: Heat treatment - Austenitized at 900℃ . Oil quenched and air cooled, or salt quenched at 205 ~ 220 ℃ for 10 minutes and air cooled Tensile strength σb≥/MPa: 1520.0 Yield strength σs≥/MPa: 1422.0 Elongation δ5≥(%): 9.0 AKV≥/J: - Hardness HRC: 45 Working pressure /MPa: 932.0 Bursting pressure /MPa: 1275.0 |
Applications:
Aircraft steel D6AC Stainless Steel Round Bar used most often in the Fasteners; Boiler rods for support; Turbine fasteners; Mechanical Parts like gears and shaft.
Equivalent Grade
Aircraft steel D6AC
Aircraft steel D6AC Stainless Steel Round Bar
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of Aircraft steel D6AC Stainless Steel Round Bar and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging, we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order as the start of our cooperation, we can accept smaller quantities at the first time. Of course, after the start, we will have further and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing, DHL/FedEx/UPS accounts can be used for sampling, and the courier fee is borne by you.
Packing method
Wooden Pallet BOX,Standard Seaworthy Package,based on the customer's special requirement,etc
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.