Custom ASTM XM-25 Stainless Steel Flat Bar 450 UNS S45000
ASTM XM-25 Stainless Steel Flat Bar Custom 450 UNS S45000
Description
ASTM XM-25 Stainless Steel Flat Bar Custom 450 UNS S45000 is a age-hardenable martensitic stainless steel that has very good corrosion resistance and moderate strength. Because ASTM XM-25 Stainless Steel Flat Bar Custom 450 UNS S45000 has corrosion resistance similar toalloy 304 stainless and with much higher yield strength, ASTM XM-25 Stainless Steel Flat Bar Custom 450 UNS S45000 has been used in applications where alloy 304 was not strong enough.
All of ASTM XM-25 Stainless Steel Flat Bar Custom 450 UNS S45000 conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
- Material:Metal, ASTM XM-25 Stainless Steel Flat Bar Custom 450 UNS S45000
- Shape: Stainless Steel Round Bar
-
Round bar / Wire rod (Diameter): 5.5mm to 800mm
-
Square bar / Flat bar: 3mm to 800mm
-
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
-
Sheet steel via cold rolled: T0.5 - 6mm X W6 - 1000mm X L1000 - 2000mm
- Length: Fixed length or random length or based on the customer's special requirement.
Products Details
ASTM XM-25 Stainless Steel Flat Bar Custom 450 UNS S45000
| Chemical Composition (weight%): |
| C (％): ≤ 0.05 Si (％): ≤ 1.00 Mn (％): ≤ 1.00 P (％)≤: 0.030 S (％)≤: 0.025 Cr (％): 14.0 ~ 16.0 Ni (％): 5.00 ~ 7.00 Mo (％): 0.50 ~ 1.00 Co (%): - W (%): - Al (%): - Cu (%): 1.25 ~ 1.75 Ti (%): - Nb (%): 8 X C Min |
| Mechanical Properties Under Final Heat Treatment: |
| Tensile strength, σb/≥ MPa: 895 Yield strength, σ0.2/≥ MPa: 655 Elongation, δ ≥(％): 10.0 Reduction of area, ф ≥ (％): 40.0 Hardness | HBW: HRC 32 min |
Applications:
ASTM XM-25 Stainless Steel Flat Bar Custom 450 UNS S45000 used most often in the Screens for the pulp and paper industry, Medical devices, Aircraft parts, Power generation applications, Chemical processing, Nuclear applications.
Equivalent Grade
ASTM XM-25 Custom 450 UNS S45000
ASTM XM-25 Stainless Steel Flat Bar Custom 450 UNS S45000
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of ASTM XM-25 Stainless Steel Flat Bar Custom 450 UNS S45000 and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging, we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order as the start of our cooperation, we can accept smaller quantities at the first time. Of course, after the start, we will have further and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing, DHL/FedEx/UPS accounts can be used for sampling, and the courier fee is borne by you.
Packing method
Wooden Pallet BOX,Standard Seaworthy Package,based on the customer's special requirement,etc
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.