UNS S64152 Stainless Steel Round Bar Jethete M152
UNS S64152 Stainless Steel Round Bar Jethete M152
Description
UNS S64152 Stainless Steel Round Bar Jethete M152 is a high-alloy chromium-nickel-molybdenum steel with the addition of vanadium for carburization with a martensitic structure, which due to high strength properties and significantly increased resistance to oxidation.
All of UNS S64152 Stainless Steel Round Bar Jethete M152 conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
- Material:Metal,Stainless Steel Round Bar, UNS S64152
- Round bar / Wire rod (Diameter): 5.5mm to 800mm
- Square bar / Flat bar: 3mm to 800mm
- Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
- Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
- Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Products Details
UNS S64152 Stainless Steel Round Bar Jethete M152
| Chemical Composition (weight%): | Mechanical Properties Under Final Heat Treatment: |
|
C(％): 0.08 ~ 0.15
Si(％): ≤ 0.35 M (％):0.50 ~ 0.90 P (％)≤:0.025 S(％)≤: 0.025 C(％):11.0 ~ 12.5 Ni (％):2.00 ~ 3.00 Mo(％): 1.50 ~ 2.00 V (%): 0.25 ~ 0.40 N (%): 0.01 ~ 0.05 |
Condition of heat treatment: annealed
Tensile strength, σb/MPa: - Yield strength, σ0.2/MPa: - Elongation, δ(％): - Reduction of area, ф(％): - Hardness | HB: ≤ 311 Condition of heat treatment: Quenched 955℃~1022℃ air/oil cooling, >=565℃ X 2h tempered Tensile strength, σb/MPa: 1000 Yield strength, σ0.2/MPa: 795 Elongation, δ(％): 17.0 Reduction of area, ф(％): 35.0 Hardness | HB: 302 ~ 352 TYPICAL APPLICATIONS Chemical equipment. Mechanical parts used in the condition of corrosion resistance. Bolts and nuts. Pressure vessel. |
Applications:
UNS S13800 Stainless Steel Round Bar is often used in the production of aviation propellers, especially loaded gears, ball screws, responsible parts working at elevated temperatures such as rotors and turbine blades, bolts in the power industry, pump components as well as coupling parts in aircraft constructions.
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of raw materials and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging, we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order as the start of our cooperation, we can accept smaller quantities at the first time. Of course, after the start, we will have further and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing, DHL/FedEx/UPS accounts can be used for sampling, and the courier fee is borne by you.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.