532nm 30W Picosecond Green Laser For FPC Dicing And Drilling
The 30W picosecond green laser adopts stable optical path design and beam management scheme, which has better power stability and excellent beam quality. The product has undergone various rigorous tests and can be used stably in various application scenarios.
Features:
Power:＞30W@200kHz
Max Energy:＞150μJ@200kHz
Compact Design
High Beam Quality
Stable Output Power and Pulse Energy
Applications:
Flexible Printed Circuit (FPC) and traditional Printed Circuit board dicing and drilling
wafer and optical filters Stealth laser dicing
Printed Circuit board and wafer precision marking
PI, PET, PMMA, PET etc cutting
Glass, Ceramic, Sapphire etc cutting and hole dril
| Parameters | Unit | BGL-532-30D | |||
| Minimum | Typical | Maximum | |||
| Optical Data | Power | W | 50 | - | - |
| Wavelength | nm | 532 | |||
| Repetition frequency | khz | 20 | - | 1000 | |
| Pulse Width | ps | - | - | 15 | |
| Average Power | w | 30W@200kHz | |||
| Maximum Pulse Energy | mJ | 150μJ@200kHz | - | ||
| Average Power Stab | - | 2.0% rms | |||
| Pulse-to-Pulse instabili | - | 3.0% rms | |||
| Spatial Mode | - | TEM00 (M2 <1.20) | |||
| Beam Roundnes | - | 85% | |||
| Beam Divergence | mrad | 2.0mrad (Full Angle) | |||
| Polarization Direction | Vertical | ||||
| Polarization Ratio | 100:1 | ||||
| Electrical Parameter |
Operating voltage | V | 110 | - | 260 |
| Other parameters | Warm-up Time | mins | - | - | 20 |
| Operation Temperature | ℃ | 15 | - | 30 | |
| Storage Temperature | ℃ | -10 | - | 50 | |
| Cooling | sec | - | Water-cooling | 10 | |
| Relative Humidity | - | 10% | - | 80% | |
Instructions
Connect 110V-260V AC power supply for laser operation.
Place the laser in a clean environment with space for sufficient heat dissipation.
Set the environment temperature close to 25℃ which is the set temperature of chiller (Generally, 25℃ is a typical set temperature of chiller. This value may vary for different lasers. Refer to the printed report attached with the laser for the real value. ) Set the environment humidity within 10%~80%. Operation of laser in high/low temperature or high humidity environment is prohibited.
Make sure the power supply of the laser is grounded. Operation of the laser in environment with strong electromagnetic interference is not recommended.
Always wearing laser goggle when the laser is operating. Staring into the laser output window is strictly prohibited.
Regularly examine of the cleanness of the distilled water and filter. Replace the filter every month. Make sure the water volume, water quality, flow rate is normal. The laser may be damaged permanently if the water is insufficient in chiller or the water flow is blocked.
Always use packing box provided by Tianjin BWT Laser Ltd. for moving or storage of the laser. Always move the laser slowly and steadily and avoid sudden shock. Special fixture may be necessary for moving the laser.
Operation Temperature 15℃~35℃.
Storage Temperature－10℃~＋50℃.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.