Digital RS485 Oxidation Reduction Potential Sensor Modbus Various Industries
China factory direct sale digital RS485 ORP sensor for water quality monitoring various industries supports Modbus
Overview
Desun Uniwill Digital ORP sensor adopts industrial on-line electrode and built-in temperature sensor, which can automatically compensate for temperature, and is suitable for long-term monitoring of online environment. The sensor adopts RS485 output and supports Modbus, which can realize networking and system integration without a controller.
Features
Range: -999 ~ 999mV Accuracy: ± 20mV
Resolution: 1mV
0 ~ 50 ℃;
IP68 protection, water depth within 10 meters
Built-in temperature sensor, automatic temperature compensation Digital sensor,
support RS-485, MODBUS protocol
Adopt high-performance industrial online electrode, can work stably for a long time
Technical parameter
| Item | Parameters |
| model | DS525 |
| Range | -999~999mV |
| Precision | ±20mV |
| Resolution | 1mV |
| Deepest depth | Underwater 30m |
| Protection level | IP68 |
| Max operating pressure | 6bar |
| storage temperature | 0~ 60 °C |
| temperature range | 0~ 50°C |
| Sensor interface | Support RS-485, MODBUS protocol |
| assembly | Input type |
| Power information | DC 5~12V, current <50mA |
| size | Φ 26 * 167.5 mm |
| Probe cable length | 10 meters (default), can be customized |
| Housing material | POM, SS316 |
Maintenance methods and common problems
Maintenance schedule and method
Maintenance schedule
It is recommended to periodically calibrate or clean the sensor surface according to the actual application scenario.
| Maintenance tasks, | Recommended maintenance frequency |
| Calibrate the sensor (if required by the competent authority) | According to the maintenance schedule required by the competent authority |
Maintenance method
Sensor maintenance
- External surface of the sensor: Wash the external surface of the sensor with tap water. If debris remains, wipe it with a moist soft cloth.
- Check the cable of the sensor: The cable should not be tight during normal work, otherwise the internal wires of the cable will be easily broken and the sensor will not work properly.
- Sensor storage: When the sensor is not in use, you should fasten the black plastic cap and check whether the sponge inside is wet. If it is not wet enough, please add 3mol / L potassium chloride solution and let the electrode be stored in the solution with potassium chloride.
Precautions
The probe contains sensitive optical and electronic components. Ensure that the probe is not subject to severe mechanical impact. Damage to the sensor due to impact or manpower will not be covered by the warranty. Water ingress to the sensor due to replacement of the ORP electrode is not covered by the warranty.
Frequently Asked Questions
| Error | Possible causes | Solutions |
| The operation interface cannot be connected or the measurement results are not displayed | Controller and cable connection error | Reconnect the controller and cables |
| Cable failure | Please contact us | |
| Measured values are too high, too low, or the values remain unstable | Measurement shifted | Recalibration |
| Water has entered the product | Please contact us | |
| The ORP electrolyte is exhausted | Replace the ORP electrochemical part |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.