5 IN1 Vacuum Ultrasonic Cavitation Radio Frequency RF Lipo Body Slimming Machine

Operation procedures

40Khz Unoisetion Ultrasonic handle-strong sound wave explosion fat head
Press "TIME SET" to adjust the time, clicking "-" to decrease the strength or click "+" to increase it. Press "PAUSE" to start the strong sound wave explosion fat head.
Mode a. b. means that:
"A" is continuous working for 3 sec and discontinuous for 2 sec.
"B" is continuous working for 4 sec and discontinuous for 3sec.
Operate with the 40KHz cavitation head for 15-20 minutes with mainly the spiral movement on body.

Vacuum Bipolar RF Handle
Panel: Press "RF CHANNEL" in the display screen to select body RF output, select the suitable intensity(adjust according to the customer's acceptable level, 3-6 is ok.), and at last press PAUSE key. The face RF starts to work.
Beautifying: Use the probe to massage the specific part of skin circularly after applying the sliming cream for about 30 to 40 minutes. It could quicken the blood circulation in the part of skin treated and has the effect of decomposing fat, etc.
Matters needing attention:
1. Apply sliming cream or cooling gel to the part of skin to be treated before the treatment.
2. Keep close contact between the probe and the skin.
3. Adjust the intensity from low level to high level.
4. Please do not irradiate eyeball directly with colored light.
5 Operate with the bipolar vacuum head for 15-20 minutes with mainly the spiral movement on body.

Multipolar RF Head for Body
Press "TIME SET" to adjust the time, clicking "+" to increase the RF intensity or "-" to decrease RF intensity, press "work" to start the operation of negative pressure vacuum RF head. Apply gel to the negative pressure vacuum RF head, point it to the position for losing weight and operate in pulling technique(drag fat at the position for losing weight to the position where it is closer to the lymph gland) for about 20 minutes.

Notes:
1. Spread gel or essence on the treated positions for hairdressing evenly.
2. In use, start with low-energy. We suggest to try for the proper energy level on the back of clients' hands before using on body of them.
3. Do not use essential oil as the medium.
4. In operation, start pulling only after negative pressure head is attached to skin.
5. Turn off the instrument probe when it is not in use.
6 Operate with the tripolar RF head for 15-20 minutes with mainly the spiral movement on body.

Quadrupole RF Head for Face and Body
Press "TIME SET" to adjust the time, clicking "+" to increase the RF intensity or "-" to decrease RF intensity, select the suitable intensity (adjust according to the customer's acceptable level, 3-6 is ok.), and at last press "work" key. The face RF starts to work.
Beautifying: Use the probe to massage the specific part of skin circularly after applying the sliming cream for about 30 to 40 minutes. It could quicken the blood circulation in the part of skin treated and has the effect of decomposing fat, etc.
Matters needing attention:
1. Apply sliming cream or cooling gel to the part of skin to be treated before the treatment.
2. Keep close contact between the probe and the skin.
3. Adjust the intensity from low level to high level.
4. Please do not irradiate eyeball directly with colored light.
5.Operate with the tripolar RF head for 15-20 minutes with mainly the spiral movement on face.

Tripolar RF Head for Faceand Eyes' Around
Press "TIME SET" to adjust the time,clicking "+" to increase the RF intensity or "-" to decrease RF intensity, select the suitable intensity (adjust according to the customer's acceptable level, 3-6 is ok.), and at last press "work" key. The face RF starts to work.
Spread gel or wrinkle smoothing essence on the treated positions for hairdressing(generally 20-30G each time), operate with the facial RF head for 15-20 minutes with mainly the spiral movement on face abd eye around.

Specification:

PACKING LIST

1x Main unit
1x multi-polar body RF head
1x 40khz cavitation head
1x vacumm bipolar Rf head
1x tripolar RF head
1x quadrupole RF head
1x power cord
1x power supply cord