BMS 30S 96V 100A lifepo4 NMC LTO battery developed for large-scale high-voltage battery energy storage systems
Model No.: RBMS07S30S100A
System Features
Each 15 strings is a battery collection unit, and 75 series batteries have 5 acquisition units.
15 probes for every 15 strings, for a total of 15
current collection uses Hall sensor, safe and reliable, no heat;
SOC estimation error ≤ 5%;
3-digit address dialing to set the BMS address;
3-channel relay dry contact output;
LED signal indicates working status (4-bit SOC indication, 1-bit operation indication, 1-bit fault indication)
3-digit address dialing to set the BMU address;
3-channel relay dry contact output;
4-channel contactor expansion and auxiliary contact detection;
Provide PC software to facilitate the customer to debug the battery system, or modify the
system parameters through the host computer;
Support temperature module expansion;
Support Bluetooth, GPRS, external serial port display expansion (extended function single machine three choice one);
Support for parallel use (maximum 7 units)
The default system overcurrent capability is 100A
![]()
Communication protocol:
CAN, RS485, Bluetooth, GPRS,Dry Contact
* Design: Master & Slave all in one
* Efficient, stable and reliable * size:W410*H232*D128cm
Unique Design
It is the latest product developed by GCE and it's unique in the market.
For 30S-75S Lithium Battery Packs
Integrated BMS supports 30S-75S lithium battery packs.
For 30S-75S Lithium Battery Packs
30s to 75s BMS adopts master-slave integrated design and relay solution to meet the lithium battery demand of multiple strings of small capacity batteries less than 100Ah. It greatly reduce the cost of users.
|
Product Name
|
Integrated BMS(master slave together in one)
|
|
Model no.
|
RBMS07S30S100A
|
|
System voltage range
|
120 - 228 V DC
|
|
Startup mode
|
DC start (optional AC and DC starter)
|
|
Number of battery strings
|
30 S(2 x 15 S)
|
|
Balance
|
Balance type
|
Passive resistance equalization
|
|
|
Balanced current
|
100mA ± 10mA(Single cell 3.4V )
|
|
Temperature Sampling
|
Numbers
|
12 Battery temperature(4*3)
|
|
|
Sampling accuracy
|
± 2℃
|
|
Voltage Sampling
|
Sampling accuracy
|
Single cell ±20mV
|
|
SOC
|
≤5%
|
|
Communication mode
|
CAN: 1 channel (communication with PCs / UPS)
RS485: 1 channel (communication with upper computer / PCS / UPS)
Bluetooth: optional (android app available)
GPRS: optional,
|
|
Display mode
|
6-digit LED indicator, including 1-bit fault indication, 1-bit operation indication, 4-bit SOC power indication
HMI display: optional
|
|
Hall sensor specifications
|
50A/100A
|
|
Maximum load of power components
|
Steady-state:100A
transient state:150A/10S( Adjustable)
|
|
Alarm level
|
1 Level
|
|
Protection level
|
2 two levels
Level 1 cut off charge / discharge
Level 2 micro cut-off switch, system power down
|
|
Operating Temperature
|
Charging : －10～75℃
Discharging : -20 to 75℃
Storage : -40 to +75℃
|
