Demodulation Accuracy 20pm Offshore Wind Lidar Measurement
Blade Load Measurement System Molas FD Demodulation Accuracy 20pm Lidar measurement
| Product introduction
The system consists of a demodulator and sensors. The sensor converts the measured signal into a wavelength signal through a fiber grating, which is divided into a load sensor, an acceleration sensor, and a temperature sensor.
| Application scenarios
It can measure the load, acceleration, temperature and other data of the blade
| Product parameters
| IP protection class | IP20 |
| Maximum working altitude | 3000m |
| Operating temperature | -20～60℃ |
| Storage temperature | -40～80℃ |
| Environment humidity | -180°～180° |
| Wind speed accuracy | 5%～95%RH |
| Powered by | 22-26VDC |
| Demodulation Accuracy | 20pm |
| IP protection class | IP67 |
| Maximum working altitude | 3000m |
| Operating temperature | -40～50℃ |
| Storage temperature | -40～80℃ |
| Environment humidity | 0～95%RH |
| Sensor type | Fiber Bragg Grating |
| Measuring range | ±1500με |
| Grating reflectivity | -0.5g～0.5g |
| IP protection level | 50%~90% |
| Product Features
LAN: network interface, which can be used for the connection of the device network; the network cable can be connected to the computer, and the device parameter setting, status observation and data transmission can be performed through the device client software.
CANopen: CAN interface, which transmits data externally through the CANopen protocol.
POWER: Power interface, which supplies power to the whole device.
1-16: Sensor interface, used to connect with different fiber grating sensors (the number of channels is customized according to customer requirements).
FIELDBUS: DB9 interface, supports external data transmission through Profibus, RS485, etc.
| Product Image
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.