5.5-400mm Alloy Steel Bar Hot Rolled Black Surface For Billet
Customize Length 5.5-400mm Outer Diameter Black Surface Alloy Round Steel Bar For Billet
OD Size Range: 5.5-400mm
Length:>10m, Customize
Material: Q195,Q235,10#,20#,35#,45#,Q215,Q345,12Cr1Mov,15CrMo,304,316,20Cr,40Cr,20CrMo,35CrMo,42CrMo,40CrNiMo,GCr15,65Mn,50Mn,50Cr,
3Cr2W8V,20CrMnTi,5CrMnMo.
Classified by chemical composition
Carbon steel can be divided into low carbon steel, medium carbon steel and high carbon steel according to chemical composition (that is, carbon content).
(1) Low carbon steel
Also known as mild steel, low carbon steel with carbon content from 0.10% to 0.30% is easy to accept various processing such as forging, welding and cutting, and is often used in the manufacture of chains, rivets, bolts, shafts, etc.
(2) Medium carbon steel
Carbon steel with a carbon content of 0.25% to 0.60%. There are killed steel, semi-killed steel, boiling steel and other products. In addition to carbon, it can also contain a small amount of manganese (0.70% to 1.20%). According to product quality, it is divided into ordinary carbon structural steel and high-quality carbon structural steel. Good thermal processing and cutting performance, poor welding performance. The strength and hardness are higher than those of low carbon steel, while the plasticity and toughness are lower than those of low carbon steel. Hot-rolled and cold-drawn materials can be used directly without heat treatment, or they can be used after heat treatment. The quenched and tempered medium carbon steel has good comprehensive mechanical properties. The highest hardness that can be achieved is about HRC55 (HB538), and σb is 600-1100MPa. Therefore, among various uses of medium strength level, medium carbon steel is the most widely used, in addition to being used as a building material, it is also widely used in the manufacture of various mechanical parts.
(3) High carbon steel
Often called tool steel, it has a carbon content from 0.60% to 1.70% and can be hardened and tempered. Hammers, crowbars, etc. are made of steel with a carbon content of 0.75%; cutting tools such as drills, taps, reamers, etc. are made of steel with a carbon content of 0.90% to 1.00%.
| Product Name | Alloy Round Steel Bar |
| Outside Diameter | 5.5-400mm |
| Technology | Hot Rolled/Cold Rolled/Heat Treatment/Forged |
| Length | 1-12m/Customized |
| Other sections | Angle Bar/Round Bar |
| Standard | GB/T799,ASTM A29,A108,A321,A575,BS970,DIN1652,JIS G4051 |
|
Material |
ASTM(1005,1006,1008,1010,1015,1020,1025,1030,1035,1040,1045, 1050,1055,1060,1065,1070,1080,1084,1016,1022) |
| DIN(Ck10,Ck15,Ck22,Ck25,Ck30,Ck35,Ck40,Ck45,Ck50, 30Mn4,40Mn4) | |
| BS(040A04,095M15,045M10,080A40,045M10,080M50) | |
| GB(Q195, Q235,Q345) | |
| Surface | Black Painted |
| Advantages | High strength, good weldability, good machining performance, good corrosion resistance |
Delivery Status
The steel is delivered in hot rolled, controlled rolled, normalized, normalized + tempered, thermomechanical rolled (TMCP) condition.
Our Company
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.