Excavator Engine Spare Parts Water Pump E3116 7E7398 3522156

Excavator Engine Spare Parts Water Pump E3116 7E7398 3522156

Product Description

Product advantages

1. The water pump impeller adopts the raw material Seiko pure aluminum leaf
2. Using imported high-quality bearings
3. Use high quality seals to ensure no water leakage
4. Original 1:1 mold opening design and manufacture, no deviation in size, accurate hole position
5. The water pump shaft adopts VG drill steel, pure fluorine rubber oil seal
6. Using high-strength materials, corrosion resistance, wear resistance, and long service life
7. 100% inspection of each product before shipment, stable quality and superior performance

Our service

1.A comprehensive service are provided from first time contact to after-sale services till customers completely feel satisfied.

2.Professional technical guidance services are provided at anytime and anywhere.

3.Terrific after-sales service: 24 hours around the clock & 12 Months Warranty.

4.Before every product is shipped, must be rigorously tested make sure quality up to the best quality assurance.

Aggregates comprising the spare part 7E7398 PUMP GROUP-WATER

7E7398 Part Number Product alog

More related products you are looking for

6C0570 PUMP GP-METERING
814B, 816B, 824C, 825C, 926, 926A, 936, 936F, 950B, 950F, 950F II, 960F, 966D, 966F, 966F II, 970F, 980C, 980F, 980F II, D250B, D25C, D25D, D300B, D30C, D350C, D350E, D35C, D35HP, D400, D400E, D40D, D...

1233472 PUMP GP-TRANSMISSION
950F, 950F II, 960F, 966C

7E7399 PUMP GP-WATER
120H, 120H ES, 120H NA, 135H, 135H NA, 613C II, 950F, 950F II, 960F

1198767 PUMP GP-METERING
814B, 814F, 814F II, 815F, 815F II, 816B, 816F, 816F II, 824C, 825C, 950B/950E, 950F, 950F II, 960F, 966F II, 970F, 980F, 980F II, R1600, R1700 II

1212501 PUMP GP-VANE
950F, 950F II

6E6406 PUMP GP-METERING
814B, 815B, 816B, 824C, 825C, 826C, 950B/950E, 950F, 950F II, 960F, 966D, 966F, 966F II, 970F, 980F, 980F II

1198765 PUMP GP-METERING
814B, 816B, 824C, 825C, 936F, 950F, 966F, 980F

1U2824 PUMP GP-VANE
613C, 613C II

1T1810 PUMP GP-GEAR
613C, 613C II, D250D

7T8891 PUMP AS-WASHER
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, ...

1268226 PUMP AS-WATER
3126, 3126B, 950F

7T8890 PUMP AS WASHER
120M, 120M 2, 12M, 140M, 140M 2, 14M, 160M, 160M 2, 16M, 215B, 215C, 215D, 219D, 225, 225D, 227, 229, 229D, 231D, 235B, 235C, 235D, 245, 245B, 245D, 311B, 311D LRR, 312, 312B L, 312C L, 312D, 312D L, ...

1265916 PUMP GP-WATER
950F, 950F II, 960F

6E2735 PUMP GP-BRAKE
966F, 966F II

8U7988 PUMP GP
206B, 212B

8U4688 PUMP GP-METERING
206B, 212B

6Y5798 PUMP GP-GEAR
994

6Y5797 PUMP GP-GEAR
994

4P1413 PUMP GP-FUEL INJECTION
3406B

4P1411 PUMP GP-FUEL INJECTION
3406B

4E3973 PUMP & LINES GP
245B

6E3752 PUMP GP-PISTON
245B

6E2063 PUMP GP-VANE
950F, 950F II

4E2437 PUMP & MOUNTING GP
950F, 950F II

Water pump failure performance

1. Unstable idle speed:
The failure of the water pump can cause the rotational resistance of the water pump to increase.

2. There will be noise in the engine part:
This sound is a rolling friive, similar to the sound of "boom boom boom".
This sound can be accelerated as the engine rotates and changes in volume
change. This noise generally increases with the severity of the fault
increasingly obvious.

3. Cooling system failure
1) Hot air is not hot
The most overlooked phenomenon caused by lack of flow. Engine water in winter
After warming up,
The hot wind cannot blow out, and inexperienced people even think that
The car is dead, it's time for a replacement. In fact, just replace a small water pump.
All can solve the problem.

2) Engine water temperature is unstable:
The performance is that the engine water temperature indior needle fluctuates within a certain range. The reason is
The water temperature in the small cycle is inconsistent due to the lack of circulation. On the one hand, it leads to
The opening temperature of the thermostat increases, on the other hand, after the high temperature water flows out, the low temperature
The water quickly flows to the thermostat, causing the thermostat to close quickly. Under normal conditions
After warming up, the water temperature of the engine will remain at a relatively constant
level, approximately at 93°C.

3) The cooling water is reduced, the large circulation is not smooth, and the engine is high temperature:
At this point, the pump has been relatively serious damage. If you continue
Driving will directly lead to increased engine damage.

FAQ
 

Q1. Which shipment can you supply?

A1: By sea, by air or by express(DHL, Fedex, TNT, EMS, UPS, etc).

Q2. What is your terms of packing?

A2: Generally, we pack our goods in neutral cartons or wooden boxes. If you have legally registered patent, we can pack the goods in your branded boxes after getting

your authorization letters.

Q3. What payments are available?

A3: T/T , Western Union, Trade assurance, L/C.

Q4. What is your terms of delivery?

A4: EXW, FOB, CFR, CIF.

Q5. How about your delivery time?

A5: Generally, it will take 1 to 3 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q6. What is your sample policy?

A6: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample fee and the courier cost.

Q7. Do you test all your goods before delivery?

A7: Yes, we have 100% test before delivery.

Q8: How do you make our business long-term and good relationship?

A8:1. We keep good quality and competitive price to ensure our customers benefit .

2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Q9: How can i trace my order?

A9: We'll send you the Bill of Lading or express tracking number once it comes out.