Excavator Engine FM12 ECFH12 ECNH12 Parts Water Pump EC360 EC460 20431135 20101193 20734268

Excavator Engine FM12 ECFH12 ECNH12 Parts Water Pump EC360 EC460 20431135 20101193 20734268
 
Product Description
 

 
Product advantages
 
1. The water pump impeller adopts the raw material Seiko pure aluminum leaf
2. Using imported high-quality bearings
3. Use high quality seals to ensure no water leakage
4. Original 1:1 mold opening design and manufacture, no deviation in size, accurate hole position
5. The water pump shaft adopts VG drill steel, pure fluorine rubber oil seal
6. Using high-strength materials, corrosion resistance, wear resistance, and long service life
7. 100% inspection of each product before shipment, stable quality and superior performance

1. Strong support We have factory product support and financial support, so the product cost is very low , and the price given is also pretty acceptable .
2. Sufficient product information We have detailed parameters , so send us the right model and correct number , we can supply the exact product .
3. Salesperson with professional knowledge and abundant experience Belparts has been developing on this area for more than 10 years , so we have wealthy experience .
4. Good management system No matter how big or small the trade is , as long as customers place the order , we will provide exporting service for free .
5. Good service attitude If you have any questions about the product , after knowing the situation , we will help the customer to solve the problem at the first time . As long as customers’ requirements are reasonable , we will endeavour to satisfy them .

 
More related products you are looking for

8170305 Bearing housing

1697207 Bearing flange

243319 Bearing shield

20542966 Bearing

1190130 Bearing bushing

243171 Bearing shield

25158873 BEARING

25162228 BEARING

8170946 BEARING

7413-103599 BEARING CUP

7413-104807 BEARING CUP

TDAA-1228-E-1175 BEARING ASSY

 

 
 


 
Water pump failure performance
 
1. Unstable idle speed:
The failure of the water pump can cause the rotational resistance of the water pump to increase.
2. There will be noise in the engine part:
This sound is a rolling friive, similar to the sound of "boom boom boom".
This sound can be accelerated as the engine rotates and changes in volume
change. This noise generally increases with the severity of the fault
increasingly obvious.
3. Cooling system failure
1) Hot air is not hot
The most overlooked phenomenon caused by lack of flow. Engine water in winter
After warming up,
The hot wind cannot blow out, and inexperienced people even think that
The car is dead, it's time for a replacement. In fact, just replace a small water pump.
All can solve the problem.
2) Engine water temperature is unstable:
The performance is that the engine water temperature indior needle fluctuates within a certain range. The reason is
The water temperature in the small cycle is inconsistent due to the lack of circulation. On the one hand, it leads to
The opening temperature of the thermostat increases, on the other hand, after the high temperature water flows out, the low temperature
The water quickly flows to the thermostat, causing the thermostat to close quickly. Under normal conditions
After warming up, the water temperature of the engine will remain at a relatively constant
level, approximately at 93°C.
3) The cooling water is reduced, the large circulation is not smooth, and the engine is high temperature:
At this point, the pump has been relatively serious damage. If you continue
Driving will directly lead to increased engine damage.
 

FAQ
 
Q1.Areyou a trader or a manufacture?
A1:We run an industry & trade integration business.
 
Q2:What about the quality of your goods?
A2:We provide unrivaled Quality -Very rigorous testing process for incoming quality control input process quality control, and final quality control for every piece, we follow QC test procedure, and do 100% FQC to ensure your satisfaction.
 
Q3.How long for delivery time after the payment?
A3:Usually, we will deliver goods within 48 hours.
 
Q4.How can I track my order during the time?
A4:We will send you the tracking number as the goods be sent.
 
Q5.What payment method do you accept ?
A5:T/T (Bank Transfer), Western Union, Money Gram, Paypal, L/C, etc.
 
Q6.May I buy samples from you?
A6:Yes! You are welcome to place sample order to test our superior quality and service.
 
Q7.Can you put my brand name (Logo) on these products?
A7: Yes! We can provide professional OEM services. Our company accepts to make the logo free for bulk order.