Antiwear  20ton Excavator Short Boom Arm Hammer Subway and Tunnel Arm for 320 ZX200-5A DX200-9C SY205C

The tunnel arm is used for construction in narrow space. Due to the small space of tunnel engineering and subway engineering, the original large and small arms cannot operate normally. The tunnel arm is also called shortened arm, which is shorter than the original large and small arms. It can work flexibly in a narrow space and the working radius is reduced. At the same time, in terms of redesign, the tunnel arm is more suitable for large-scale crushing hammer, and the middle arm oil cylinder is placed below to protect the oil cylinder from crushed stones.

The excavator tunnel shortening arm, the tunnel special shortening arm, and the special short arm after special modifiion according to the working conditions of the tunnel, can be equipped with an enlarged bucket.

The special arm for the tunnel is made of high-strength manganese steel material, which can cope with the harsher crushing environment.

GOOD SERVICE:

1. Online support within 24 hours.

2. Appointment video technical support. 

   (Our engineers have focused on excavator boom and attachment over 10 years)

3. Long excavator boom shall be two/three jointed pcs to make it fittable into container to save shipping cost.

WARRANTY

1 year for long reach boom, 180 days for cylinder and linkage, 90 days for bucket.

1. Long reach excavator boom

2. Excavator telescopic boom

3. Demolition boom

4. Excavator rock bucket

5. Excavator tilting bucket

6. Hydraulic grabs for excavators

​

Please do not hesitate to contact us for any details, Thank you!