High Pressure Cleaning Machine Pipe Dredging Car Washing Machine

Accessories:

High pressure cleaning gun*1

The nozzle*4

Water inlet and outlet pipes*1

The filter*1

High pressure hose*10m

perating specifications for high pressure cleaning machine:

1 Preparations for power-on

1.1 Checking the fittings of the pressure cleaner. Joints are secured.

1.2 Reduce water inlet pipeline connection, ensure smooth water.

1.3 Check and confirm that the main switch of the control panel of the pressure washer is in the "stop" position.

1.4 Cable connections to the main power supply are correct.

1.5 Check the water inlet pipe door to ensure that there is no leakage.

2 operation

2.1 Fully unfold the high-pressure cleaning tube (if the pressure washer has a high-pressure cleaning tube wound, release a high-pressure cleaning tube of appropriate length as required and fix it by rotating the ring core).

2.2 Open the water inlet pipe door to ensure that there is no leakage.

2.3 Switch the main switch of the control panel of the pressure washer to the "on" position.

2.4 Hold the high pressure cleaning gun with both hands, pull the cleaning spray gun button, and wait for water spraying. At the same time, check whether there is leakage in each joint of the high pressure washer. If there is leakage, switch the main switch of the control panel of the high pressure washer to the "stop" position and disconnect the main power supply for treatment. (When the pressure is lower than 20Bar, there is no water ejecting from the pressure washer. The pressure must be adjusted slowly and gradually according to the cleaning requirements after the release of the cleaning spray gun button, and the pressure must be ≤200Bar).