Seawater Desalination RO System Drinking Water Filter Treatment Plant

What is the Seawater Desalination RO System?

The core process of desalination is the Reverse Osmosis Process, mainly used to treat the salty water with high TDS more than 10000ppm. It consists of a High pressure pump followed by an Energy Recovery device and the Reverse Osmosis Membranes.

In this process sea water is forced against semi-permeable membranes under pressure in a continuous flow condition. The high salt content of sea water requires that the operating pressure for Reverse Osmosis must be between 60-70 bar. As the water permeates through the membrane most of the dissolved impurities removed and 99.5% of the total salt is removed. The impurities are left behind in the flowing water and the concentrated stream from the membranes is discharged to the ocean.

Working Process of Seawater Desalination RO System
 

How Do Reverse Osmosis Filter Systems Work?

If you're looking for a water filter that provides quality drinking water, reverse osmosis (RO) filtration is one of the most popular and best methods of water filtration out there. In simple terms, reverse osmosis works by forcing water through a semi-permeable membrane, leaving behind contaminants that are flushed down the drain. Clean drinking water is collected in a holding tank.

Raw Water Quality Condition:

1) Raw water: seawater, high salty underground water;
2) Electricity conductivity: more than 20000μm/cm;
3) TDS: more than 10000ppm(mg/L);
4) Hardness: ＜100ppm(mg/L);
5) Turibidity: ＜100NTU(FNU);
6) Color: no color
7) PH: 6-9

Jufu's Strength

- Excellent Performance

1. High efficiency

2. Low Power Consumption

3. Fully automatic control

4. Using high-quality components

- Manufacturing Highlights

1. The design of the entire reverse osmosis seawater desalination control system is controlled by advanced computer programs at home and abroad.

2. Adopt membrane elements with strong anti-pollution to improve the service life of the system.

3. Pressure indicator, online pressure monitoring, selected high-quality accessories.

- Customer Service Highlights

​1. Predictive Maintenance

2. Short leadtime

3. Provide backup pump service

4. Parts remanufacturing to reduce maintenance costs

5. Short maintenance cycle

FAQ

Q: What is the Seawater Desalination RO System?

A: The core process of desalination is the Reverse Osmosis Process, mainly used to treat the salty water with high TDS more than 10000ppm.

Q: How about our pharmaceutical water purification system?

A: Our medical purified water system uses bipolar reverse osmosis + EDI electrodeionization process, with high desalination rate, stable effluent quality and reliable performance, ensuring the stable operation of the system to a large extent.

Q: What’s the type of your company? Manufacturer or Trading agent?

A: We’re the Hi-tech manufacturer in Water treatment industrial for almost two decades, we specialized in integrating Research & Development, Manufacturing, Sales, Engineering installation and Consulting on water treatment and water purification equipment and technologies.