MR511 Hot wire gas Sensor Oxide Semiconductors Can Be Used For Natural Gas
MR511 Hot wire gas Sensor Oxide Semiconductors Can Be Used For Natural Gas
The MR511 gas sensor detects gas based on changes in thermal and electrical conductivity caused by gas adsorption on the surface of a metal oxide semiconductor. The change in the resistance of the sensing element determines the gas concentration. The MR511 consists of a sensing element and a compensation element connected in series, forming one arm of a Wheatstone bridge. When exposed to combustible gas, the sensing element's resistance decreases, causing a change in the bridge's output voltage. This voltage change increases with increasing gas concentration. The compensation element acts as a reference and provides temperature compensation.
Specification:
| Product Type | Thermal Linear Gas Sensor |
| Standard Package | Plastic |
| Operating Voltage | (V) 3.0 ± 0.1 |
| Operating Current | (mA) ≤ 180 |
| Sensitivity | (mV) ≥ 80 |
| Measurement Range (ppm) | 0-20,000 |
| Response Time (90%) | ≤ 20s |
| Recovery Time (90%) | ≤ 60s |
| Operating Environment | -40°C to +70°C, less than 95% RH |
| Storage Environment | -20°C to +70°C, less than 70% RH |
| Dimensions (mm) | Φ12mm × 10mm |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.