AO2 PTB-18.10 Highly Stable Oxygen Gas Sensor For Oxygen Alarm Devices

Price Negotiable

Price: Negotiable

MOQ: 1

Delivery Time: 3-5workingdays

Product Description

AO2 PTB-18.10 Highly Stable Oxygen Gas Sensor For Oxygen Alarm Devices

Application Fields:

Motor vehicle exhaust gas detection equipment.
Exhaust gas environmental protection detection equipment.
Oxygen index testing equipment.
Oxygen alarm devices.
Safety oxygen monitoring systems in coal mines, steel, and petrochemical fields.

Installation and Usage Precautions:

Avoid exposure to high - concentration solvent vapors during storage, installation, and operation.
When using sensors with printed circuit boards, degreasing agents should be used before installation. Do not glue directly on or near the critical part as the solvent may cause crazing of the plastic.
When installing the sensor, it must only be screwed in by hand to ensure a gas - tight seal. Do not use spanners or similar mechanical aids to avoid damaging the sensor thread.

Type	Oxygen Sensor
Operating Principle	Electrochemical (Partial Pressure)
Measurement Range	0 - 100% Oxygen (at atmospheric pressure)
Output	9 - 13 mV in air
Response Time (T90)	< 5 s
Response Time (T99.5)	< 40 s
Zero Bias	< 20 μV
Operating Temperature Range	- 20 °C to + 50 °C
Temperature Compensation	< 2% variation (0 - 40 °C)
Differential Pressure Range	0 - 500 mbar
Absolute Pressure Range	500 - 2000 mbar (0.5 - 2.0 bar)
Relative Humidity Range	0 - 99% non - condensing
Long - term Output Drift	< 10% signal loss per year
Load Resistance	10 kΩ
Housing Material	Red ABS
Weight	40 g
Connector	3 - pin Molex
Expected Service Life	2 years in air