AOD1000 High Pressure Submersible Oxygen Sensor High-pressure Oxygen Chamber Oxygen Concentration Sensor For Oxygen Monitoring
AOD1000 High Pressure Submersible Oxygen Sensor High-pressure Oxygen Chamber Oxygen Concentration Sensor For Oxygen Monitoring
Product Introduction:
The AOD1000 is a high - pressure - resistant oxygen sensor, which can be used in high - pressure environments. Its interface model is a Molex 3 - pin connector. Different from the oxygen sensors for normal - pressure detection, its structure and composition enable it to withstand much higher pressure than ordinary oxygen sensors.
Working Principle:
It measures the oxygen concentration based on the voltage - divider electrochemical principle, and can achieve full - scale linear output.
Application Fields:
It does not require an external power supply during operation. After professional and accurate product calibration and temperature compensation at the factory, it is widely used in oxygen monitoring of high - pressure equipment, such as hyperbaric oxygen chambers, inspection ships, tankers, and other equipment.
|
Parameter |
Value |
Unit |
|---|---|---|
| Measuring Range | 0 - 100 | % |
| Output Voltage (in Air) | 8.5 - 14 | mV |
| Response Time (T90) | < 10 | s |
| Linearity | Full - scale linear | - |
| Temperature Compensation | < 2% O₂ equivalent (0 - 50℃) | - |
| Load Resistance | ≥ 10 | kΩ |
| Interface | Molex 3 - pin connector (2.54mm) | - |
| Housing Material | Gray ABS | - |
| Weight | Approximately 25 | g |
| Operating Temperature Range | 0 - 45 | ℃ |
| Operating Pressure Range | 0.8 - 7.0 | bar |
| Operating Humidity Range | 0 - 99 (non - condensing) | %RH |
| Recommended Storage Temperature | 0 - 25 | ℃ |
| Expected Lifetime | 42 | months |
| Storage Lifetime | 6 | months |
| Shelf Life | 12 | months |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.