YJJ SHT31-DIS-B2.5KS GY-SHT31-D Temperature And Humidity Sensor Probe Module Module For Air I2C IIC Communication

Product Description:

YJJ SHT31-DIS-B2.5KS GY-SHT31-D Temperature and Humidity Sensor Probe Module Module for Air I2C IIC Communication

Features:

Main parameters of the SHT31 humidity and temperature sensor are as follows:

Core parameters

‌Humidity measurement range‌: 0%-100% RH

‌Temperature measurement range‌: -40℃ - 125℃

‌Humidity measurement accuracy‌: ±2% RH

‌Temperature measurement accuracy‌: ±0.2℃

‌Operating voltage‌: 2.15V - 5.5V

‌Operating current‌: < 1.5mA

‌Communication interface‌: I2C

‌Package size‌: DFN8_2.5X2.5MM_EP (2.5×2.5×0.9mm)

Expansion Function

Alarm Mode: Supports extreme temperature and humidity alarms. These alarms can be reset through software or hardware reset functions.

Anti-interference capability: The PE material casing. It is recommended to avoid high-temperature environments (> 80℃).

Response time: Humidity measurement takes approximately 8 seconds.

Notes for Attention

When in actual use, it is necessary to pay attention to the working temperature range of the sensor and avoid exceeding the recommended limit.

During connection, it is necessary to match the I2C address and the configuration of the clock line/data line.

SHT31 chip has eight pins:

The Pin Name Comments

1 SDA data pin, input/output

2 ADDR address pin, enter

3 ALENT alarm pin, output;Suspended when not in use

SCL clock pin, input/output

5 VDD power pin, input

6 nRESET reset pin, low level valid, input

7 R useless pin, ground

8 VSS ground pin

Repeatability affects the measurement time of SHT30 and therefore the energy consumption of the sensor.

The address of the sensor is changed by changing the voltage of ADDR pin.The default address is when ADDR connects to VSS (0X44), which can be changed to 0X45.For details on pins, please refer to the data manual.

Specifications: