ShenzhenYijiajie Electronic Co., Ltd.
                                                                                                           
Verified Supplier
20 Years
Since 2006
Menu

YJJ ZE03‑HF Hydrogen Fluoride Sensor Module 0‑10ppm HF UART‑TTL & Analog Output

Price Negotiable
Price: Negotiable
MOQ: 1
Delivery Time: 5-8 days
Brand: YJJ
Product Description

Product Description:

YJJ ZE03‑HF Hydrogen Fluoride Sensor Module 0‑10ppm HF UART‑TTL & Analog Output

 

Features:

Core technical parameters

| Item | Parameter |

| Detection gas | HF (Hydrogen Fluoride) |

| Measurement range | **0 - 10 ppm** |

| Resolution | 0.1 ppm |

| T90 response time | ≤ 90 s 

| Power Supply | DC 5V ± 0.1V, operating current < 5mA 

| Digital Output | UART-TTL (3.3V level); 9600-8-N-1; Active reporting / question-and-answer mode; Direct output of ppm concentration |

| Analog Output VO | 0-3V linear voltage output, concentration-voltage one-to-one correspondence |

| Temperature Compensation | On-board temperature sensor, firmware automatically performs temperature compensation |

| Operating Environment | -20 to +50℃; 15-90%RH, **strictly prohibit condensation** Winsen Ele... |

| Storage conditions | -20 to 50℃, 30 - 70% RH |

| Expected lifespan | 2 years (in an air environment) 

| Dimensions | Φ23.5 mm × 24.5 mm | 

 

Pin Definition (5 Pin, same as ZE03 series standard pins)

 

| Pin | Definition | Explanation |

| --- | --- | --- |

| VCC | Power Supply | DC5V |

| GND | Power Ground | Common Ground |

| TXD | Module Transmission | Connect to the microcontroller's RX (3.3V level, direct connection to 5V IO is prohibited) |

| RXD | Module Reception | Connect to the microcontroller's TX |

| VO | Analog Voltage Output | 0-3V analog signal |

 

Output Explanation

1. UART Serial Port (Preferred) **: Directly outputs HF concentration (one decimal place), module temperature, fault status; supports command reading and address modification. Level 3.3V, 5V microcontrollers must perform level conversion.

2. **Analog VO Output**: 0-3V proportional to 0-10ppm; Analog output accuracy is weaker than the serial port, suitable for simple collection.

 

Application Scenarios

- Monitoring of HF leakage in chemical and semiconductor etching processes

- Detection of toxic HF gas in metallurgy, electroplating, and acid washing workshops

- Fixed transmitters and portable detectors in waste gas treatment and hazardous chemical factories

- PLC, industrial control equipment, and secondary development integration for gas alarms

 

Specifications:

Detection gas HF
Measurement range 0-10PPM
Resolution 0.1PPM
T90 response time ≤ 90 s
Power Supply DC 5V ± 0.1V

 

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company ShenzhenYijiajie Electronic Co., Ltd.
Location Room 3306AB 33rd Floor, SEG Plaza,Huaqiang North Road, Futian District, Shenzhen Guangdong Province 518028
Contact Person Xu

Request A Quote

Please check your email address.
Your message must be at least 20 characters.