5454 3003 2219 2011 Anti Slip Aluminium Sheet Plate 12 Gauge 20 Gauge Polished Roofing
12 Gauge 20 Gauge Aluminum Sheet Plate Alloy 5454 Polished Roofing Sheet Coil
Product Description:
5454 antirust aluminum strength is about 20% higher than 5052, its characteristics are roughly the same as 5154, but the corrosion resistance is better than 5154 in harsh environment. Applied to automobile wheels.
| ASTM B209 Aluminium Alloy Plate 5083 H111 Aluminum Sheet Per Square Meter | |
| Alloy | 5005 5052 5083 5086 5182 5754 5154 5454 5A05 5A06 |
| Temper | O/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34 H16/H26/H36 H18/H28/H38 H114/H194, etc. |
| Specification | Thickness≤170mm; Width≤2200mm ; Length≤12000mm |
| Application | Marine Grade Plate, Ring-Pull Can End Stock, Ring-Pull Stock, Automobile Body Sheets, Automobile Inside Board, The Protective Cover On Engine. |
| Feature | All the advantages of normal aluminium alloy, high tensile strength & yield strength,good corrosion resistant performance, well welding property, well fatigue strength,and suitable for anodic oxidation. |
Mechanical Property:
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Other | Al | ||
| Single | Total | |||||||||||||
| 5A05 | 50 | 0.5 | 0.1 | 0.30～0.6 | 3.2～3.8 | — | — | 0.2 | — | — | — | 0 | 0.1 | Rem |
| 5B05 | 0.4 | 0.4 | 0.2 | 0.20～0.6 | 4.7～5.7 | — | — | — | Si+Fe:0.6 | 0.15 | — | 0.05 | 0.1 | Rem |
| 5A06 | 0.4 | 0.4 | 0.1 | 0.50～0.8 | 5.8～6.8 | — | — | 0.2 | Be:0.0001～0.005② | 0.02～0.10 | — | 0.05 | 0.1 | Rem |
| 5B06 | 0.4 | 0.4 | 0.1 | 0.50～0.8 | 5.8～6.8 | — | — | 0.2 | Be:0.0001～0.005② | 0.10～0.30 | — | 0.05 | 0.1 | Rem |
| 5A12 | 0.3 | 0.3 | 0.05 | 0.40～0.8 | 8.3～9.6 | — | 0.1 | 0.2 | Be:0.005 Sb:0.004～0.05 |
0.05～0.15 | — | 0.05 | 0.1 | Rem |
| 5A13 | 0.3 | 0.3 | 0.05 | 0.40～0.8 | 9.2～10.5 | — | 0.1 | 0.2 | Be:0.005 Sb:0.004～0.05 |
0.05～0.15 | — | 0.05 | 0.1 | Rem |
| 5A30 | Si+Fe:0.40 | 0.1 | 0.50～1.0 | 4.7～5.5 | — | — | 0.25 | Cr:0.05～0.20 | 0.03～0.15 | — | 0.05 | 0.1 | Rem | |
| 5A33 | 0.35 | 0.35 | 0.1 | 0.1 | 6.0～7.5 | — | — | 0.50～1.5 | Be:0.0005～0.005② | 0.05～0.15 | 0.10～0.30 | 0.05 | 0.1 | Rem |
| 5A41 | 0.4 | 0.4 | 0.1 | 0.30～0.6 | 6.0～7.0 | — | — | 0.2 | — | 0.02～0.10 | — | 0.05 | 0.1 | Rem |
| 5A43 | 0.4 | 0.4 | 0.1 | 0.15～0.40 | 0.6～1.4 | — | — | — | — | 0.15 | — | 0.05 | 0.15 | Rem |
| 5A66 | 0.005 | 0.01 | 0.005 | — | 1.5～2.0 | — | — | — | — | — | — | 0 | 0.01 | Rem |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.50～1.1 | 0.1 | — | 0.25 | — | — | — | 0.05 | 0.15 | Rem |
| 5019 | 0.4 | 0.5 | 0.1 | 0.10～0.6 | 4.5～5.6 | 0.2 | — | 0.2 | Mn+Cr:0.10～0.6 | 0.2 | — | 0.05 | 0.15 | Rem |
| 5050 | 0.4 | 0.7 | 0.2 | 0.1 | 1.1～1.8 | 0.1 | — | 0.25 | — | — | — | 0.05 | 0.15 | Rem |
| 5251 | 0.4 | 0.5 | 0.15 | 0.10～0.50 | 1.7～2.4 | 0.15 | — | 0.15 | — | 0.15 | — | 0.05 | 0.15 | Rem |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2～2.8 | 0.15～0.35 | — | 0.1 | — | — | — | 0.05 | 0.15 | Rem |
| 5154 | 0.5 | 0.4 | 0.1 | 0.1 | 3.1～3.9 | 0.15～0.35 | — | 0.2 | ① | 0.2 | — | 0.05 | 0.15 | Rem |
| 5154A | 0.5 | 0.5 | 0.1 | 0.5 | 3.1～3.9 | 0.25 | — | 0.2 | ① Mn+Cr:0.10～0.50 |
0.2 | — | 0.05 | 0.15 | Rem |
| 5454 | 0.25 | 0.4 | 0.1 | 0.50～1.0 | 2.4～3.0 | 0.05～0.20 | — | 0.25 | — | 0.2 | — | 0.05 | 0.15 | Rem |
| 5554 | 0.25 | 0.4 | 0.1 | 0.50～1.0 | 2.4～3.0 | 0.05～0.20 | — | 0.25 | ① | 0.05～0.20 | — | 0.05 | 0.15 | Rem |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6～3.6 | 0.3 | — | 0.2 | Mn+Cr:0.10～0.6 | 0.15 | — | 0.05 | 0.15 | Rem |
| 5056 | 0.3 | 0.4 | 0.1 | 0.05～0.20 | 4.55.6 | 0.05～0.20 | — | 0.1 | — | — | — | 0 | 0.15 | Rem |
| 5356 | 0.25 | 0.4 | 0.1 | 0.05～0.20 | 4.5～5.5 | 0.05～0.20 | — | 0.1 | ① | 0.06～0.20 | — | 0.05 | 0.15 | Rem |
| 5456 | 0.25 | 0.4 | 0.1 | 0.50～1.0 | 4.7～5.5 | 0.05～0.20 | — | 0.25 | — | 0.2 | — | 0.05 | 0.15 | Rem |
| 5082 | 0.2 | 0.35 | 0.15 | 0.15 | 4.0～5.0 | 0.15 | — | 0.25 | — | 0.1 | — | 0.05 | 0.15 | Rem |
| 5182 | 0.2 | 0.35 | 0.15 | 0.20～0.50 | 4.0～5.0 | 0.1 | — | 0.25 | — | 0.1 | — | 0.05 | 0.15 | Rem |
| 5083 | 0.4 | 0.4 | 0.1 | 0.40～1.0 | 4.0～4.9 | 0.05～0.25 | — | 0.25 | — | 0.15 | — | 0.05 | 0.15 | Rem |
| 5183 | 0.4 | 0.4 | 0.01 | 0.50～1.0 | 4.3～5.2 | 0.05～0.25 | — | 0.25 | ① | 0.15 | — | 0.05 | 0.15 | Rem |
| 5086 | 0.4 | 0.5 | 0.1 | 0.20～0.7 | 3.5～4.5 | 0.05～0.25 | — | 0.25 | — | 0.15 | — | 0.05 | 0.15 | Rem |
Product Details:
Certification:
Packaging & Shipping:
FAQ:
Q1: ARE YOU FACTORY OR TRADER?
A1: Sylaith Special Steel is a cold rolling manufacturer of magnetic stainless steel coil since 2009. We've gained our Export Right and become an integrated company of industry and trade in order to satisfy buyer's multi-request on different material and products.
Q2: HOW TO GET A SAMPLE?
A2: FREE samples are available for your checking and testing. And to get free samples, you need to send us you detailed receiving address (including post code) and your DHL/FedEx/UPS account for collecting samples, courier cost will be paid in your side.
Q3: HOW TO VISIT YOUR FACTORY?
A3: Most of the main cities have flights to Shanghai; you can take flight to Shanghai Putong/Hongqiao International Airport.
If you come from Hongkong, it will take 2 hours by flight (every day 5 flight around noon time).
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.